Orange County NC Website
Browse       Search
DocuSign Envelope ID:D561B1AE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> 1. Cross-reference to paint system and locations of application areas. Use same designations <br /> indicated on Drawings and in schedules. <br /> 2. Printout of current "MPI Approved Products List" for each product category specified in <br /> Part 2,with the proposed product highlighted. <br /> 1.4 QUALITY ASSURANCE <br /> A. MPI Standards: <br /> 1. Products: Complying with MPI standards indicated and listed in "MPI Approved <br /> Products List." <br /> 2. Preparation and Workmanship: Comply with requirements in "MPI Architectural <br /> Painting Specification Manual" for products and paint systems indicated. <br /> 1.5 DELIVERY, STORAGE,AND HANDLING <br /> A. Store materials not in use in tightly covered containers in well-ventilated areas with ambient <br /> temperatures continuously maintained at not less than 45 deg F(7 deg C). <br /> 1. Maintain containers in clean condition,free of foreign materials and residue. <br /> 2. Remove rags and waste from storage areas daily. <br /> 1.6 PROJECT CONDITIONS <br /> A. Apply paints only when temperature of surfaces to be painted and ambient air temperatures are <br /> between 50 and 95 deg F (10 and 35 deg C). <br /> B. Do not apply paints when relative humidity exceeds 85 percent; at temperatures less than 5 <br /> deg F (3 deg C)above the dew point; or to damp or wet surfaces. <br /> 1.7 EXTRA MATERIALS <br /> A. Furnish extra materials described below that are from same production run (batch mix) as <br /> materials applied and that are packaged for storage and identified with labels describing <br /> contents. <br /> 1. Quantity: Furnish an additional 5 >percent, but not less than 2 gal. of each material and <br /> color applied per residence <br /> PART 2 -PRODUCTS <br /> 2.1 MANUFACTURERS <br /> A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering <br /> products that may be incorporated into the Work include,but are not limited to,the following: <br /> INTERIOR PAINTING 099123 -2 <br />