Orange County NC Website
Browse       Search
DocuSign Envelope ID: D561BlAE-DF34-4907-AD06-AOEB37BBE427 <br /> CHAPEL HILL ORANGE COUNTY VISITORS BUREAU August 12,2020 <br /> 308 WEST FRANKLIN,CHAPEL HILL,NC <br /> SECTION 096723-RESINOUS FLOORING-Alternate 01 <br /> PART 1 —GENERAL <br /> 1.1 RELATED DOCUMENTS <br /> A. Drawings and general provisions of the Contract, including General and Supplementary Conditions <br /> and Division 1 Specification Sections, apply to this Section. <br /> 1.2 SUMMARY <br /> A. This section includes the following: <br /> 1. Resinous flooring system as shown on the drawings and in schedules. Specifically resinous floor <br /> system as an alternate for rooms 06 and 10. See Floor Plan A-103 for limits of this flooring <br /> alternate. <br /> B. Related sections include the following: <br /> 1. Cast-in-Place Concrete, section 03 30 00 <br /> 2. Concrete Curing, section 03 39 00 <br /> 1.3 SYSTEM DESCRIPTION <br /> A. The work shall consist of preparation of the substrate,the furnishing and application of a cementitious <br /> urethane based self-leveling seamless flooring system with decorative quartz aggregate broadcast and <br /> Epoxy broadcast and topcoats. <br /> B. The system shall have the color and texture as specified by the Owner with a nominal thickness of 1/4 <br /> inch. It shall be applied to the prepared area(s)as defined in the plans strictly in accordance with the <br /> Manufacturer's recommendations. <br /> C. Cove base(if required)to be applied where noted on plans and per manufacturers standard details <br /> unless otherwise noted <br /> 1.4 SUBMITTALS <br /> A. Product Data: Latest edition of Manufacturer's literature including performance data and installation <br /> procedures. <br /> B. Manufacturer's Material Safety Data Sheet(MSDS)for each product being used. <br /> C. Samples: A 3 x 3 inch square sample of the proposed system. Color,texture, and thickness shall be <br /> representative of overall appearance of finished system subject to normal tolerances. <br /> 1.5 QUALITY ASSURANCE <br /> A. The Manufacturer shall have a minimum of 10 years experience in the production, sales, and technical <br /> support of epoxy and urethane industrial flooring and related materials. <br /> B. The Applicator shall have experience in installation of the flooring system as confirmed by the <br /> manufacturer in all phases of surface preparation and application of the product specified. <br /> C. Requests for substitutions shall be considered at the discretion of the Architect.. <br /> D. System shall be in compliance with requirements of United States Department of Agriculture (USDA), <br /> Food,Drug Administration(FDA), and local Health Department. <br />