Orange County NC Website
DocuSign Envelope ID:070B6BC7-CDE2-4AO8-BE62-07FA6BFDO53B <br /> 11/20/2020 <br /> SECTION 07 13 00—BELOW GRADE SHEET WATERPROOFING <br /> PART 1 -GENERAL <br /> 1.1 RELATED DOCUMENTS <br /> A. Drawings and general provisions of the Contract, including General and Supplementary <br /> Conditions and Division 01 Specification Sections,apply to this Section. <br /> 1.2 SUMMARY <br /> A. Section Includes: <br /> 1. Installation of a new sheet waterproofing system and protection materials below-grade <br /> within the partially excavated area adjacent to the north and east wall of the Uniform <br /> Storage Room. Location of waterproofing installation identified on the design drawings. <br /> 2. Removal of large debris from the surface of the soil in the partially unexcavated space and <br /> placement of loose laid polyethylene sheeting with taped joints over the soil. <br /> 3. Infill of hole in the interior face of the masonry foundation wall with polymer-modified <br /> repair mortar. Infill of isolated voids around other through-wall penetrations. <br /> 4. Routing of crack in the mortar and brick on the inside face of the foundation wall in <br /> preparation for installation of new joint sealant. <br /> B. Related Sections: <br /> 1. See Division 31 Section 312000 EARTH MOVING for excavation and backfill associated <br /> with preparation of foundation walls and installation of new waterproofing system <br /> materials. <br /> 1.3 INFORMATIONAL SUBMITTALS <br /> A. Submit written confirmation of contractor's approved applicator's status from the waterproofing <br /> system manufacturer. <br /> B. Submit a 6" by 6" sample of waterproofing membrane with manufacturer's identification labels <br /> attached. <br /> C. Submit product data and MSDS for each product listed in this specification section and others <br /> accessory products that may be required by the waterproofing membrane manufacturer for a <br /> complete installation of the work. <br /> D. Submit manufacturer's application manuals/instructions, which describe completely the <br /> preparation of surfaces and application of specified materials. <br /> 07 1300 BELOW GRADE WATERPROOFING Page 1 of 7 <br />