Orange County NC Website
Browse       Search
4. All solid waste containers, dumpsters, recycling bins, etc. <br />shall be located within an enclosure, buffered in accordance <br />with the standards contained herein, and meeting the <br />following criteria: <br />a. Loading areas shall be designed and situated not to <br />negatively affect adjacent properties. <br />b. Solid waste enclosures shall be so located as to not <br />impact internal traffic flow, <br />c. Loading zones shall not be located within areas <br />designated as housing for solid waste facilities. <br />c. Architectural Design: In addition to the standards detailed in Section 6.5 <br />of the UDO, the following specific standards shall apply to the Project: <br />i. Development Area 1: <br />1. Development shall abide by the information detailed in <br />Exhibit 1 of the approved Application package. <br />ii. Development Area(s) 2 through 5: <br />1. Permitted exterior finishes and/or siding materials shall be <br />limited to: <br />a. Cement/concrete siding, such as Hardi-plank, <br />b. Brick and/or stucco, <br />c. Concrete in pre-cast or cast-in-place (CIP) <br />applications. <br />i. Where utilized, large expanses shall be <br />broken-up and modulated with architectural <br />variations like scoring, reveals, ornamental <br />embellishments, etc. <br />d. Concrete masonry units (CMU’s) limited to: <br />i. Standard block, painted for service areas out of <br />public view, rears of parapets, etc. OR <br />ii. Split-face and/or ground face CMU’s <br />e. Dry-stack and/or ashlar stone shall be permitted only <br />when utilized as an identifying characteristic for a <br />structure. <br />f. All storefronts and glass walls shall utilize glazing. <br />Reflective and/or mirrored glass is prohibited. <br />2. Roofs shall abide by the following standards: <br />a. Roof design that serve to enhance the capture of <br />natural light shall be encouraged; <br />175