Orange County NC Website
Browse       Search
History Note: Substitute for NCAC 02C.0107 <br /> Eff. July 1, 2008;Amended eff. October 23, 2009;March 25, 2020 <br /> K.WELL CONTRACTOR IDENTIFICATION PLATE <br /> 1. For all wells except monitoring wells from Section III (B)of these Rules, an <br /> identification plate shall be installed on the well within 72 hours after completion of <br /> the drilling. <br /> 2. The identification plate shall be constructed of a durable weatherproof, rustproof <br /> metal or equivalent material approved by the OCHD. <br /> 3.The identification plate shall be securely attached to the aboveground portion of the <br /> well casing where it is readily visible and in a manner that does not obscure the <br /> identification plate. <br /> 4. "'Secure attachme0'includes rivets, stainless fasteners that do not cause Comment[VH62]:OCHD CLARIFICATION ' <br /> contamination hazards caused by drilling through the casing; and adhesive intended NEEDED FOR WELL TAGS <br /> for use with the casing material. In the case where an electrical grounding block is <br /> secured to the casing by means of a bolt or screw which penetrates the casing,the <br /> tag may be secured by the same means as the block, provided that no data are <br /> obscured. No form of tape by itself, in the absence of one of the approved methods <br /> listed above, shall be considered as a secure form of attachment. The means of <br /> attachment shall not obscure any of the required data. Secure attachment is not any <br /> form of tape alone. <br /> 5. The identification plate shall not be removed by any person. <br /> 6.The identification plate shall be stamped with permanent legible markings to show <br /> the: <br /> a) Name and registration number of the drilling contractor; <br /> b)Total depth of well; <br /> c) Casing depth (FT)and inside diameter(in.); <br /> d)Screened intervals of screened wells; <br /> e) Packing interval of gravel-or sand-packed wells; <br /> f)Yield, in gallons per minute(gpm),or specific capacity in gallons per minute per <br /> foot of drawdown (gpm/FT-dd); <br /> g)Static water level and date measured; and <br /> h) Date well completed <br /> History Note: Substitute for NCAC 02C.0107 <br /> Eff. July 1, 2008;Amended eff. October 23, 2009;March 25, 2020 <br /> L. PUMP INSTALLER INFORMATION PLATE <br /> 1. For all wells except monitoring wells from Section I II (B)of these Rules, an <br /> identification plate shall be installed on the well within 72 hours after completion of <br /> the pump installation; <br /> 28 <br />