Orange County NC Website
<br />a. The developer shall adhere to the proper disposal methodology for solid waste <br />management. <br />b. The applicant shall provide external space for collection of solid waste and recyclable <br />materials. Materials collected shall be at least equivalent to the services provided by <br />Orange County Solid Waste. <br />c. Waste collection areas shall be located in such a manner as to provide convenient <br />access for users of the facility and safe passage for service vehicles. <br />d. The developer shall be required to place the following additional notes on any approved <br />site plan: <br />i. Any gate design will include gate retainers. <br />ii. If any vehicles are parked in the refuse or recyclables collection vehicle access <br />area, the containers will not receive service until the next scheduled collection day. <br />iii. Orange County will not be responsible for any pavement damage that may result <br />from service vehicles. <br />iv. By Orange County Ordinance, clean wood waste, scrap metal and corrugated <br />cardboard, all present in construction waste, must be recycled. <br />v. By Orange County Ordinance, all haulers of construction waste must be properly <br />licensed. <br />e. In cases where waste collection areas are located across property lines or district lines <br />for shared areas, the developer shall prepare and record a joint access agreement (and <br />a shared dumpster agreement) to assure that (both parties may use) the proposed <br />trash/recycling area and that it can be serviced across property lines. <br />f. The developer shall reserve space within all solid waste collection areas for segregated <br />grease rendering/recycling collection facilities and shall provide space for segregated <br />food waste collection near the delivery entrance for any building that houses, proposes <br />to include, or may at some future date incorporate a restaurant, cafeteria, bar, or other <br />food service facility at any time. <br />g. All solid waste containers, dumpsters, recycling bins, etc. shall be located within an <br />enclosure, buffered in accordance with the standards contained herein, and meeting <br />the following criteria: <br />i. Loading areas shall be designed and situated not to negatively affect adjacent <br />properties. <br />ii. Solid waste enclosures shall be so located as to not impact internal traffic flow, <br />iii. Loading zones shall not be located within areas designated as housing for solid <br />waste facilities. <br /> <br />7. EROSION CONTROL. The development will comply with the NC Sedimentation and Pollution <br />Control Act of 1973 and the North Carolina Administrative Code Title 15A Chapter 4. <br /> <br />8. STORMWATER MANAGEMENT. The following standards shall be observed with respect to <br />47