2020-141-E AMS - Summit Northern Campus CMAT testing

Browse Search

DocuSign Envelope ID:90883988-076D-486D-B746-055E86E2D681 Proposal for CMT and Special Inspections Services Proposal Number:T19-0043 Detention Center, EAC and POB (Northern Campus Expansion) September 18, 2019 Hillsborough, North Carolina ASSUMPTIONS During our proposal preparation certain assumptions were required based on our review of the project plans. Based on the available information (noted above), the following assumptions apply: • Rates associated with overtime work are at 1.5 times the listed hourly rates in the attached fee schedule and rates shown on the Fee Summary. Overtime for our services is defined as work on the project by a single person in excess of 8 hours per day and all time on weekends, Summit recognized holidays, and night shifts; • Weekend and/or night work is not anticipated for this project; • We assume a workday will consist of a normal 8-hour day; • Crews will be working at a pace and distance from one another such that 1 field personnel per day is sufficient to observe the work, with the exception of slab and grout pours which may require 2 field personnel; • We anticipate our services being needed 1 full-time inspector (8 hours/day) over a 12-month period. Assuming 22 work days in a month,this equals approximately 264 days (or 2,112 hours). Per Special Inspections requirements, we also anticipate needing an additional technician onsite for 5 months during this timeframe. This equals approximately 110 days (or 880 hours) for a second man onsite. • We assume 1.5 hours a week for 100 weeks for Project Management tasks during construction. • Laboratory testing and compaction testing will be performed in accordance with ASTM standards. LIMITATIONS Our work will be performed in a manner consistent with that level of care and skill ordinarily exercised by other members of Summit's profession practicing in the same locality, under similar conditions, and at the date the services are provided. Our conclusions, opinions, and recommendations will be based on a limited number of observations and data. It is possible that conditions could vary between or beyond the data evaluated. In all cases, the contractor is solely responsible for the direction and quality of the work, adherence to plans and specifications, and repair of defects regardless of when they are found. Summit makes no guarantee or warranty, express or implied, regarding the services, communication (oral or written), report, opinion, or instrument of service provided. Safety of our employees is of paramount concern to Summit. You will be notified if the location of the project represents a potential safety concern to our employees. Unsafe conditions for field work will require a modification of our estimated scope of work and associated fees. We will advise you of the additional costs necessary to mitigate these unanticipated conditions, if applicable.