Orange County NC Website
Browse       Search
AutoQuote 18.2 <br />2704 1 Sscor suction system with 1 canister and lid, on-off power switch, 5-foot exhaust hose, <br />2705 1 vacuum gauge and internal regulator (no vacuum outlet needed) - to be installed… <br />2706 (1)… aft of action area control panel on the streetside interior wall.N/C <br />2725 1 <br />2728 1 <br />2729 1 CUSTOMER NOTES / SPECIAL REQUESTS <br />2730 1 ** Fabricate O2 cylinder storage made of 2" x 2" angle welded to the floor of the 549.57 <br />2731 1 squad bench (inside storage) and then coated with bedliner material. There will be 0.00 <br />2732 1 a minimum of (2) seatbelt-style straps installed to hold down the tanks and a "Z"0.00 <br />2733 1 angle installed at the aft end of 2" x 2" angles.0.00 <br />2739 1 <br />2741 1 HVAC SYSTEMS: STANDARD SPECIFICATIONS N/C <br />2742 1 <br />2743 1 12 VDC multi-speed exhaust fan at rear of module <br />2744 1 1 static air intake at front curbside of module <br />2745 1 Floor-level return air plenum with replaceable filter for A/C-heat unit <br />2746 1 <br />2747 1 HVAC SYSTEMS: OPTIONS <br />2748 1 <br />2749 (1 ) * Relocate the HVAC system from over the R4 to the center of the bulkhead. <br />2750 1 <br />2754 1 Ford F-series and Dodge Type I Chassis <br />2763 1 125 / 12 Dual Volt HVAC systems: <br />2764 (1 ) * Dual voltage heavy duty combination heater / air conditioner system with <br />2765 1 digital electronic thermostat with digital temperature display WITH dual compressors <br />2766 1 (one 12 VDC OEM chassis compressor and one 115 VAC auxiliary compressor) AND <br />2767 (1)* Auxiliary A/C condenser mounted under module body. 3,031.28 3,031.28 <br />2852 1 <br />2853 1 CUSTOMER NOTES / SPECIAL REQUESTS <br />2854 1 ** Static air intake will be located on streetside of module due to center-mounted HVAC 0.00 <br />2855 1 ** REF. Line 2764: When installing the dual volt HVAC system, install the control box 0.00 <br />2856 1 on the upper back wall in the Mermaid air flow space above the Mermaid system.0.00 <br />2857 1 ** In lieu of the standard #105 condenser, install a 2-fan flat mount condenser, 0.00 <br />2858 1 Pro Air #109 #50-001-601 under the L4 compartment for the dual HVAC system.0.00 <br />2859 1 ** Fabricate and install (2) bare aluminum brackets around the underbody condenser 0.00 <br />2860 1 to further secure and protect the condenser.168.42 <br />2861 1 <br />2863 1 FIRE EXTINGUISHER: OPTIONS <br />2864 1 <br />2865 (2) 5# ABC fire extinguishers N/C <br />2867 1 * Extinguisher mounting instructions: Ship Loose <br />2869 1 <br />2871 1 LOOSE EQUIPMENT to be provided by Excellance <br />2872 1 Price: <br />2873 1 ** Supply (4) Bowman #GB-003 glove box holders.350.75 <br />2933 1 <br />2934 1 CUSTOMER SUPPLIED PARTS <br />2935 1 <br />2936 1 It is Excellance policy for all parts to be supplied by Excellance. The reasons for this policy <br />2937 1 are to allow Excellance: (1) to better engineer and manufacture the vehicle by obtaining the <br />2938 1 parts in advance, (2) provide better control over tracking the delivery of all parts and getting the <br />2939 1 part to the correct vehicle for which it is intended, and (3) it allows Excellance to better adhere to <br />2940 1 its production schedule. Disruptions in our production schedule are very costly and wasteful in <br />2941 1 terms of labor. Therefore, exceptions to this policy will result in a charge of $250.00 per part <br />2942 1 supplied by any dealer or customer PLUS the appropriate labor charge for installing any such part. <br />2943 Note: Excellance does not warrant the installation of customer supplied parts installed by Excellance! <br />2944 1 Excellance waives the $250 "parts charge" for two-way radio equipment, radio antenna, and cots. <br />2945 1 <br />Page 15 7/23/2019 3:02 PM <br />DocuSign Envelope ID: C3BD39C0-6CA0-4C46-9E28-269DE7D0AEEF