|
38
<br /> SCHEDULE A
<br /> SPECIFICATIONS
<br /> Air conditioner, cab—2 year, unlimited miles Frame rail corrosion —5 year, unlimited miles
<br /> Cab corrosion—5 year rust-thru, unlimited miles Generator— 1,000 hours, unlimited miles
<br /> Diesel engine—3 year, 150,000 miles Noise emissions—lifetime of the vehicle
<br /> Drive train—2 year, unlimited miles Suspension—2 year, unlimited miles
<br /> Emissions—5 year, 50,000 miles
<br /> Vendor must give detailed information about the locations in our area for warranty service, such
<br /> as name of dealer, address, phone, etc.
<br /> QUALITY & WORKMANSHIP
<br /> A. The mobile health unit shall be free from defects that may impair its serviceability or
<br /> detract from appearance.
<br /> B. All bodies, systems, equipment and interfaces with the chassis shall be done in
<br /> accordance with the OEM's Body Builders Book.
<br /> C. All components shall be new. Defective components shall not be furnished. Parts,
<br /> equipment and assemblies, which have been repaired or modified to overcome
<br /> deficiencies, shall not be furnished without approval of the purchaser. Component
<br /> parts and units shall be manufactured to definite standard dimensions with proper fits,
<br /> clearances and uniformity. Welded, bolted and riveted construction utilized shall be in
<br /> accordance with the highest standards of industry. General appearance of the mobile
<br /> health unit shall not show any evidence of poor workmanship.
<br /> D. The following deficiencies shall be cause for rejection:
<br /> 1. Rough, sharp or unfinished edges, burrs, seams, corners,joints, cracks and
<br /> dents.
<br /> 2. Non-uniform panels. Edges that are not radiused, beveled, etc.
<br /> 3. Paint runs, sags, orange peel,fish eyes, etc., and any other imperfection of lack
<br /> of complete coverage of paints or coatings.
<br /> 4. Body panels or components that are uneven, unsealed, or contain cracks, dents
<br /> or have voids.
<br /> 5. Misalignment of body fasteners, glass,viewing panels, light housings, other
<br /> items with large or uneven gaps, spacing etc. such as door, body panels and
<br /> hinges panels.
<br /> 6. Hoses,wiring or harness routed through panels and bulkheads without
<br /> grommeting or other protective insulation, routed across components in a
<br /> manner allowing chaffing to occur or routed in such a manner to be damaged by
<br /> the exhaust system.
<br /> 7. Improper electrical connections,or loose,vibrating, or abrading components.
<br /> 8. Interference of chassis components, body parts, doors etc.
<br /> 9. Improperly supported or secured hoses, wiring harnesses, mechanical controls,
<br /> etc., including interference with other components.
<br /> 10. Leaks of any gas, vacuum, or fluid lines (air conditioning, coolant, oil,oxygen,
<br /> etc.).
<br /> 11. Noise, panel vibrations, etc.
<br /> 12. Inappropriate or incorrect use of hardware,fasteners, components, or methods of
<br /> construction
<br /> 13. Incomplete or improper welding, riveting or bolting.
<br /> 14. Lack of uniformity and symmetry where applicable.
<br /> 15. Loose,vibrating, abrading body parts, components, subassemblies, hoses,
<br /> wiring harnesses or trim.
<br /> 16. Improper body design that could cause injury during normal use or maintenance,
<br /> and which fail to provide access to perform routine or mandatory repairs or
<br /> maintenance on the mobile health unit electrical and mechanical systems. In
<br /> addition,the improper combination of options which by their combination and
<br /> installation are inherently incompatible with regard to function or safety.
<br /> 17. Sagging, non-form fitting upholstery or padding.
<br /> 18. Incomplete or incorrect application of rustproofing.
<br /> 19. Equipment malfunctions.
<br /> 20. Inadequate welding, riveting, bolting or attachment of components.
<br /> 21. Visual deformities.
<br /> 22. Unsealed appurtenances or other body components, leaking gaskets etc.
<br /> 23. Delamination of plastic composition materials.
<br />
|