Orange County NC Website
Browse       Search
SthWall Building Diagnostics Consultants Government Services Annex <br /> District Attorney Office <br /> Roof Replacement <br /> November 2009 <br /> 108 Cleaning up <br /> A . Remove masking tape immediately after joints have been tooled . <br /> B . Keep adjacent surfaces clean and free from sealant as the installation progresses . Use <br /> solvent or cleaning agent as recommended by the sealant manufacturer. <br /> C . Do not allow uncured sealants to contact surfaces adjacent to the joints , or any other non - <br /> joint surfaces . If uncured sealants are introduced to prohibited areas , sealant shall be <br /> removed as follows : <br /> 1 . Non -porous Surfaces - Immediately remove all excess sealant adjacent to the <br /> joint and elsewhere by using xylol , tolvol or methyl ethel ketone while sealant is <br /> still in uncured state. <br /> 2 . Porous Surfaces - Allow sealant to develop initial cure , then remove by abrasion <br /> or other mechanical means . Exercise extreme care to maintain the original <br /> surface texture without damage . <br /> END OF SECTION <br /> 09-26 Sealants and Caulking <br /> 079200- 5 <br />