Planning Board agenda 030619 - Laserfiche WebLink

Browse Search

Article 5: Uses 141 Section 5.16: Standards for Automotive/Transportation Related Uses (2) Multiple Uses, identified in Section 5.15.3(A)(1), are permitted �^*,,,4h`-^OAM zonanci dostr!Gt only in accordance with the following standards: (a) The site plan nwst shall identify the square footage of each structure by type of use. (b) The Principal Use type of Research Facility With Manufacturing must be established on the site. (c) The Multiple Use shall not exceed 25% of the total square footage of all structures on the site. 5.15.4 Sawmills194 (A) Use Standards (1) Use shall not be: (a) Permitted as a Conditional Use District. Refer to Section 5.1.3 of this Ordinance; or (b) Permitted within the Rural Buffer land use classification, as designated by the adopted Comprehensive Plan, as part of a Conditional Zoning District application. (B) Standards of Evaluation195 (1) Minimum lot size: 5 acres. (2) All structures, equipment, and storage shall be located a minimum of 100 feet from the property line. (3) Hours of operation shall be limited to the hours between 7 a.m. and 7 p.m. (4) Site shall have direct access to a major road, as classified in the Orange County Comprehensive Plan, and shall use said road as the primary access, unless approved otherwise in the permit. STANDARDS • AUTO M OTIVE/TRAN S PORTATION 5.16.1 Airports, General Aviation, Heliports, STOL 196 (A) Use Standards (1) Shall not be permitted as a Conditional Use District. Refer to Section 5.1.3 of this Ordinance. (B) Submittal Requirements and Standards of Evaluation for Class A Special Use Permit (1) Submittal Requirements In addition to the information required in section 2.7, the following shall be submitted as part of the application: (a) A configuration diagram depicting the layout of runways, taxiways, approach zones and overrun areas. These diagrams should also be on aerial photographs that show the area within five miles of the proposed site. 194 Existing regulations from Section 5.14.3 of the UDO. 195 A Sawmill is permitted within the AS and ASE-CZ districts subject to the aforementioned standards. To ensure clarity on applicable development standards,staff is recommending modification of existing language signifying the standards are applicable in all districts. 196 Existing standards moved from Section 5.17.5 of the UDO and renumbered accordingly. Orange County, North Carolina—Unified Development Ordinance Page 5-159