Orange County NC Website
Browse       Search
DocuSign Envelope ID: B94F2D40-3B3C-47A7-86C2-6F1 B4F92C62C <br /> Orange County Emergency Services Building Construction Documents <br /> 2.04 INTERMEDIATE METAL CONDUIT (IMC) <br /> A. Manufacturers: <br /> 1. Allied Tube& Conduit: www.alliedeg.com/#sle. <br /> 2. Republic Conduit: www.republic-conduit.com/#sle. <br /> 3. Wheatland Tube Company: www.wheatland.com/#sle. <br /> B. Description: NFPA 70, Type IMC galvanized steel intermediate metal conduit complying with ANSI <br /> C80.6 and listed and labeled as complying with UL 1242. <br /> 2.05 ELECTRICAL METALLIC TUBING (EMT) <br /> A. Manufacturers: <br /> 1. Allied Tube &Conduit; www.alliedeg.com/#sle. <br /> 2. Republic Conduit: www.republic-conduit.com/#sle. <br /> 3. Wheatland Tube Company; : www.wheatland.com/#sle. <br /> B. Description: NFPA 70, Type EMT steel electrical metallic tubing complying with ANSI C80.3 and <br /> listed and labeled as complying with UL 797. <br /> C. Fittings: <br /> 1. Manufacturers: <br /> a. Bridgeport Fittings Inc: www.bptfittings.com/#sle. <br /> b. O-Z/Gedney, a brand of Emerson Electric Co: www.emerson.com/#sle. <br /> c. Thomas & Betts Corporation: www.tnb.com/#sle. <br /> 2. Description: Fittings complying with NEMA FB 1 and listed and labeled as complying with UL <br /> 514B. <br /> 3. Material: Use steel or malleable iron. <br /> a. Do not use die cast zinc fittings. <br /> 4. Connectors and Couplings: Use compression (gland) or set-screw type. <br /> a. Do not use indenter type connectors and couplings. <br /> 2.06 RIGID POLYVINYL CHLORIDE (PVC) CONDUIT <br /> A. Manufacturers: <br /> 1. Cantex Inc: www.cantexinc.com/#sle. <br /> 2. Carlon, a brand of Thomas & Betts Corporation: www.carlon.com/#sle. <br /> 3. JM Eagle: www.jmeagle.com/#sle. <br /> B. Description: NFPA 70, Type PVC rigid polyvinyl chloride conduit complying with NEMA TC 2 and <br /> listed and labeled as complying with UL 651; Schedule 40 unless otherwise indicated, Schedule 80 <br /> where subject to physical damage; rated for use with conductors rated 90 degrees C. <br /> C. Fittings: <br /> 1. Manufacturer: Same as manufacturer of conduit to be connected. <br /> 2. Description: Fittings complying with NEMA TC 3 and listed and labeled as complying with UL <br /> 651; material to match conduit. <br /> 2.07 ACCESSORIES <br /> A. Corrosion Protection Tape: PVC-based, minimum thickness of 20 mil. <br /> B. Conduit Joint Compound: Corrosion-resistant, electrically conductive; suitable for use with the <br /> conduit to be installed. <br /> C. Solvent Cement for PVC Conduit and Fittings: As recommended by manufacturer of conduit and <br /> fittings to be installed. <br /> D. Pull Strings: Use nylon cord with average breaking strength of not less than 200 pound-force. <br /> PART 3 EXECUTION <br /> 3.01 EXAMINATION <br /> A. Verify that field measurements are as indicated. <br /> B. Verify that mounting surfaces are ready to receive conduits. <br /> C. Verify that conditions are satisfactory for installation prior to starting work. <br /> PDC Project 18102 CONDUIT FOR ELECTRICAL 26 05 33.13 - 3 <br /> 12/17/2018 SYSTEMS <br />