Orange County NC Website
Browse       Search
DocuSign Envelope ID: B94F2D40-3B3C-47A7-86C2-6F1 B4F92C62C <br /> SECTION 01 73 00 29 E- ONSTUATION AN9 TUAINING <br /> / AUT 1 2GENEUAL <br /> 1.1 SUMMARY <br /> A. This Section includes administrative and procedural requirements for instructing Owner's personnel, including the <br /> following: <br /> 1. Demonstration of operation of systems, subsystems, and equipment. <br /> 2. Training in operation and maintenance of systems, subsystems, and equipment. <br /> B. Related Sections include the following: <br /> 1. Division 01, Section "Project Management and Coordination"for requirements for pre-instruction conferences. <br /> 1.2 SUBMITTALS <br /> A. Instruction Program: Submit two copies of outline of instructional program for demonstration and training in <br /> electronic format, including schedule of proposed dates, times, length of instruction time, and instructors' names <br /> for each training module. Include learning objective and outline for each training module. <br /> 1. At completion of training, submit two complete training manuals for Owner's use. <br /> B. Qualification Data: For firms and persons specified in "Quality Assurance"Article to demonstrate their capabilities <br /> and experience. Include lists of completed projects with project names and addresses, names and addresses of <br /> architects and owners, and other information specified. <br /> 1.3 QUALITY ASSURANCE <br /> A. Instructor Qualifications: A factory-authorized service representative, complying with requirements in Division 01, <br /> Section "Quality Requirements,"experienced in operation and maintenance procedures and training. <br /> 1.4 COORDINATION <br /> A. Coordinate instruction schedule with Owner's operations. Adjust schedule as required to minimize disrupting <br /> Owner's operations. <br /> / AUT h 2/ U09 u CTS <br /> 2.1 INSTRUCTION PROGRAM <br /> A. Program Structure: Develop an instruction program that includes individual training modules for each system and <br /> equipment not part of a system, as required by individual Specification Sections, and as follows: <br /> 1. Flooring maintenance. <br /> 2. HVAC systems, including air distribution systems and terminal equipment and devices. <br /> 3. HVAC instrumentation and controls. <br /> B. Training Modules: Develop a learning objective and teaching outline for each module. Include a description of <br /> specific skills and knowledge that participant is expected to master. For each module, include instruction for the <br /> following: <br /> 1. Basis of System Design, Operational Requirements, and Criteria: Include the following: <br /> a. System, subsystem, and equipment descriptions. <br /> b. Performance and design criteria if Contractor is delegated design responsibility. <br /> c. Operating standards. <br /> d. Regulatory requirements. <br /> e. Equipment function. <br /> f. Operating characteristics. <br /> g. Limiting conditions. <br /> h. Performance curves. <br /> 2. Documentation: Review the following items in detail: <br /> a. Emergency manuals. <br /> b. Operations manuals. <br /> c. Maintenance manuals. <br /> d. Project Record Documents. <br /> e. Identification systems. <br /> f. Warranties and bonds. <br /> g. Maintenance service agreements and similar continuing commitments. <br /> DPOO- EUANG 9 ESIGN HIQHNI 01 73 00 21 PAO- 1V85e z#d8o 9 AnRsr IaDi 5v6v, bsNC <br /> OUANGE COuNTgsNC 1h)071h01© <br />