Orange County NC Website
Browse       Search
DocuSign Envelope ID: B94F2D40-3B3C-47A7-86C2-6F1 B4F92C62C <br /> SECTION 01 60 00-PRODUCT REQUIREMENTS <br /> PART 1 -GENERAL <br /> 1.1 SUMMARY <br /> A. This Section includes the following administrative and procedural requirements: <br /> 1. Selection of Products for use In project. <br /> 2. Product Delivery, Storage,And Handling. <br /> 3. Manufacturers'Standard Warranties on Products. <br /> 4. Special Warranties. <br /> 5. Product Substitutions and Comparable Products. <br /> B. Related Sections include the following: <br /> 1. Division 01, Section "Closeout Procedures"for submitting warranties for contract closeout. <br /> 2. Divisions 02 through 49 Sections for specific requirements for warranties on products and installations <br /> specified to be warranted. <br /> 1.2 DEFINITIONS <br /> A. Products: Items purchased for incorporating into the Work, whether purchased for Project or taken from previously <br /> purchased stock. The term "product" includes the terms "material," "equipment," "system," and terms of similar <br /> intent. <br /> 1. Named Products: Items identified by manufacturer's product name, including make or model number or other <br /> designation, shown or listed in manufacturer's published product literature, that is current as of date of the <br /> Contract Documents. <br /> 2. New Products: Items that have not previously been incorporated into another project or facility, except that <br /> products consisting of recycled-content materials are allowed, subject to specifications, unless explicitly stated <br /> otherwise. Products salvaged or recycled from other projects are not considered new products. <br /> 3. Comparable Product: Product that is demonstrated and approved through submittal process, or where <br /> indicated as a product substitution, to have the indicated qualities related to type, function, dimension, in- <br /> service performance, physical properties, appearance, and other characteristics that equal or exceed those of <br /> specified product. <br /> B. Substitutions: Changes in products, materials, equipment, and methods of construction from those required by the <br /> Contract Documents and proposed by Contractor. <br /> C. Basis-of-Design Product Specification: Where a specific manufacturer's product is named and accompanied by the <br /> words"basis of design," including make or model number or other designation, to establish the significant qualities <br /> related to type, function, dimension, in-service performance, physical properties, appearance, and other <br /> characteristics for purposes of evaluating comparable products of other named manufacturers. <br /> D. Manufacturer's Warranty: Preprinted written warranty published by individual manufacturer for a particular product <br /> and specifically endorsed by manufacturer to Owner. <br /> E. Special Warranty: Written warranty required by or incorporated into the Contract Documents, either to extend time <br /> limit provided by manufacturer's warranty or to provide more rights for Owner. <br /> 1.3 SUBMITTALS <br /> A. Product List: Submit in electronic format a list, in tabular from, showing specified products. Include generic names <br /> of products required. Include manufacturer's name and proprietary product names for each product. <br /> 1. Coordinate product list with Contractor's Construction Schedule and the Submittals Schedule. <br /> 2. Form: Tabulate information for each product under the following column headings: <br /> a. Specification Section number and title. <br /> b. Generic name used in the Contract Documents. <br /> c. Proprietary name, model number, and similar designations. <br /> d. Manufacturer's name and phone number. <br /> e. Supplier's name and phone number. <br /> f. Installer's name and phone number. <br /> g. Projected delivery date or time span of delivery period. <br /> h. Identification of items that require early submittal approval for scheduled delivery date. <br /> 3. Completed List: Within 30 days after date of commencement of the Work, submit an electronic copy of <br /> completed product list. Include a written explanation for omissions of data and for variations from Contract <br /> requirements. <br /> ©BOOMERANG DESIGN#1835 01 60 00-1 510 Meadowlands Drive,Hillsborough, NC <br /> ORANGE COUNTY,NC 12/07/2018 <br />