Orange County NC Website
Browse       Search
Name:.Iames Grady <br />Address: 205 Rencher St. <br />City: Hillsborough, NC 27278 <br />Phone Number: 245-1298 <br />Date: July 1, 2004 <br />EXTERIOR: <br />Remove the brick foundation wall at the front of the unit. <br />Use a brick saw to cut a straight line at the front left corner. <br />The foundation shall be removed to below ground level. <br />Add soil to level the grade at the exposed wall area. <br />Seed & straw the exposed soil. All brick & debris shall be <br />hauled to the landfill. <br />2. Install a treated crawlspace door & frame located at the front right <br />corner. Install a pressure treated 2x6 frazne &'/a inch pressure <br />treated plywood, Install galvanized hinges & locking hasp. <br />3. Trim all brush to ground level at the front of the unit. Remove <br />all cut brush. Hand-rake the area to loosen the soil. Seed & straw <br />the exposed azea. <br />4. Install a 5' x 5' front porch & steps. All wood shall be pressure <br />treated lumber. Install the porch floor tight against the door <br />tlueshold. Use 5/4 decking for the porch floor.. Install a 2x 10 outer <br />band. hlstall a .36" railing around the porch. Install handrails on <br />both sides of the steps. Install 2x2 pickets placed 4" apart on the <br />guardrail & handrail. All porch wont shall meet the NC Building <br />Codes for Porches & Decks,. <br />Remove ALL existing wood framing located near the back door. <br />Install a 5' x 5' treated landing level with the door- threshold. <br />Install a 42" wide ramp leading to the driveway,. The ramp slope <br />shall be a 1/12. The porch & r°amp floor surface shall be 5/4 treated <br />decking. Install railings around the landing & ramp. All work <br />shall meet the NC Residential Codes for Porches & Ramps. <br />6. Remove one tnwk load of home-owner trash & debris, Remove <br />all appliances & debris from the yard. The truck size shall be <br />1 ton minimum. <br />