Agenda - 09-04-2018 8-h - Right of Way Encroachment Agreement for Non-Utility Encroachments on Primary and Secondary Highways

Browse Search

1. All roadways and ramps. 2. Right of way lines and where applicable, the control of access lines. 3. Location of the proposed encroachment. 4. Length and type of encroachment. 5. Location by highway survey station number. If station number cannot be obtained, location should be shown by distance from some identifiable point, such as a bridge, road, intersection, etc. (To assist in preparation of the encroachment plan, the Department's roadway plans may be seen at the various Highway Division Offices, or at the Raleigh office.) 6. Drainage structures or bridges if affected by encroachment. 7. Typical section indicating the pavement design and width, and the slopes, widths and details for either a curb and gutter or a shoulder and ditch section, whichever is applicable. 8. Horizontal alignment indicating general curve data, where applicable. 9. Vertical alignment indicated by percent grade, P.I. station and vertical curve length, where applicable. 10. Amount of material to be removed and /or placed on NCDOT right of way, if applicable. 11. Cross - sections of all grading operations, indicating slope ratio and reference by station where applicable. 12. All pertinent drainage structures proposed. Include all hydraulic data, pipe sizes, structure details and other related information. 13. Erosion and sediment control. 14. Any special provisions or specifications as to the performance of the work or the method of construction that may be required by the Department must be shown on a separate sheet attached to encroachment agreement provided that such information cannot be shown on plans or drawings. 15. The Department's Division Engineer should be given notice by the applicant prior to actual starting of installation included in this agreement. 16. Method of handling traffic during construction where applicable. 17. Scale of plans, north arrow, etc. L