2018-325-E AMS - Bordeaux Construction Co. Northern Campus construction

Browse Search

DocuSign Envelope ID: 04E136D1 -507C- 4219- BF16- 446F8D2192F8 Owner's property. The identification badges shall at a minimum display the company name, telephone number, employee name and a picture of the employee. The CMAR and its Subcontractors shall comply with the Owner's access procedures when working on any existing facility. Owner and its representatives reserve the right to require the CMAR to immediately remove any such person(s) failing to comply with this requirement until such time as proper identification requirements are complied with. 18. CUTTING, PATCHING AND DIGGING 18.1. The CMAR shall ensure satisfactory performance of all cutting, fitting, or patching that may be required to make the Work come together properly and fit to receive or be received by Work of other Subcontractors shown upon or reasonably implied by the drawings and specifications for the completed structure, as the Project Designer may direct. 18.2. Any cost brought about by defective or ill -timed Work shall be borne by the party responsible therefore. 18.3. No Subcontractor shall endanger any Work of another such Subcontractor by cutting, digging, or other means, nor shall any Subcontractor cut or alter the Work of any other such Subcontractor without the consent of the Project Designer and the affected Subcontractor(s). 19. UTILITIES, STRUCTURES, SIGNS 19.1. Prior to the operation of permanent systems, the CMAR will cooperate with the Owner to arrange for temporary power, lighting, water, and heat to maintain space temperature above freezing, as required for construction operations. Utility charges for temporary power, lighting, water, and heat will be paid directly by the Owner, unless the Owner directs the CMAR to pay such charges as a General Conditions expense. 19.2. The CMAR shall provide or arrange for as appropriate necessary and adequate apparatus and facilities for water, electricity, gas, fuel, oil, sewer, and other utility services, which may be required for completion of the Project. It is anticipated that the Owner will pay directly to the each utility company all public utility charges for metered utilities such as water, sewer and power. Nevertheless, if requested by the Owner, any permanent meters installed shall be listed in the CMAR's name until its Work is deemed substantially complete and occupied by the Owner, and the Owner may hold the CMAR responsible for extended utility charges in the event completion of the Project is delayed. The Owner or CMAR, as applicable, shall cooperate with one another to recover actual costs of metered utilities from the responsible party should delays occur in Project completion. Extended metered utility costs are in addition to the liquidated damages provided for elsewhere in this Contract. 19.3. Any meters listed in the name of the CMAR shall be re- listed in the Owner's name on the day following completion and acceptance of the CMAR's Work, and the Owner shall pay for services used after that date. 19.4. The Owner shall be reimbursed for all metered utility charges after the meter is re- listed in the Owner's name and prior to completion and acceptance of the Work of all Subcontractors. Reimbursement shall be made by the Subcontractor that's Work has not been completed and accepted. 19.5. The CMAR shall have the permanent building systems in sufficient readiness for furnishing temporary climatic control at the time a building is enclosed and secured. The HVAC systems shall maintain climatic control throughout the enclosed portion of the building sufficient to allow completion of the interior finishes of the building. A building shall be considered enclosed and secured when windows, doorways (exterior, mechanical, and electrical equipment rooms), and Page 18 of 53 Revised 10/17