Orange County NC Website
Browse       Search
DocuSign Envelope ID: B49FB256 -4ADF- 4759- AF63- 134AD44FC239 <br />5thWall Building Diagnostics Consultants Slate Roof Replacement <br />Orange County Skills Development Center <br />Chapel Hill, NC <br />August 2017 <br />DIVISION 7 <br />THERMAL AND MOISTURE PROTECTION <br />SECTION 079200 <br />SEALANTS AND CAULKING <br />PART1 GENERAL <br />1.01 Related Documents <br />Drawings and general provisions of the contract including General, Supplemental and Special <br />Conditions, and other Division 1 specification sections apply to work of this section. <br />1.02 Work Included <br />Throughout the work, caulk and seal all joints including joints behind the new membrane as <br />required to provide a positive barrier against passage of air and passage of moisture. <br />1.03 Related Work <br />Section 076200 — Sheet Metal Flashing and Trim <br />1.04 Quality Assurance <br />A Qualifications of manufacturer: Products used in this work shall be produced by <br />Manufacturers regularly engaged in the manufacture of similar items and with a history <br />of successful production acceptable to the Designer. <br />B Sealant Contractor shall be an approved applicator by the sealant manufacturer. Sealant <br />Contractor shall provide written certification from the manufacturer of such prior to <br />beginning work. <br />C In acceptance or rejection of the work of this section, the Owner will make no allowance <br />for lack of skill on the part of the workmen. <br />1.05 Product Handling <br />A. Deliver materials to the job site in original, unopened containers. Materials are to be <br />stored in a protected area between 40 to 80 degrees Fahrenheit. <br />B. Do not retain on the job site any material which has exceeded the shelf life <br />recommended by its manufacturer. <br />C. Protect all surfaces from staining or damage. All damaged work shall be repaired or <br />replaced as directed by the Designer and at no additional cost to the Owner. <br />1.06 Job Conditions <br />Do not apply caulking or sealants when the surface temperature is below 40 degrees Fahrenheit <br />or above 125 degrees Fahrenheit. Do not apply materials when surface is damp or during cold, <br />rainy, or frosty weather. <br />17 -198 Sealants and Caulking <br />079200 -1 <br />