Orange County NC Website
Browse       Search
DocuSign Envelope ID: B49FB256 -4ADF- 4759- AF63- 134AD44FC239 <br />5thWall Building Diagnostics Consultants <br />DIVISION 7 <br />THERMAL AND MOISTURE PROTECTION <br />SECTION 076200 <br />SHEET METAL FLASHING AND TRIM <br />PART1 GENERAL <br />1.01 Related Documents <br />Slate Roof Replacement <br />Orange County Skills Development Center <br />Chapel Hill, NC <br />August 2017 <br />Drawings and general provisions of the contract including General, Supplemental and Special <br />Conditions, and other Division 1 specification sections apply to work of this section. <br />1.02 Work Included <br />Installation of new gutter, metal edging, counterflashing, step flashing, and miscellaneous trim. <br />1.03 Related Work <br />A. Section 061000 - Rough Carpentry <br />B. Section 073300 — Slate Roofing <br />C. Section 079200 - Sealants and Caulking <br />1.04 Quality Assurance <br />A. Qualifications of Manufacturer: Products used in the work of this section shall be <br />produced by manufacturers regularly engaged in the manufacture of similar items and <br />with a history of successful production acceptable to the Owner. <br />B. Qualifications of Contractor: Use adequate number of skilled workmen who are <br />thoroughly trained and experienced in the necessary crafts and are completely familiar <br />with the specified requirements and the methods needed for the proper performance of <br />the work in this section. <br />C. In acceptance or rejection of the work of this section, the Owner shall make no allowance <br />for lack of skill on the part of the workmen. <br />1.05 Shop Drawings <br />A. Submit shop drawings in accordance with this specification. Shop drawings shall be <br />scaled to clearly indicate all profiles and components. Minimum scale: 3" = 1 foot. <br />B. Indicate material profile, jointing pattern, jointing details, fastening methods, termination <br />details, and type and gauge of metal. <br />C. Indicate locations of field applied sealant. <br />1.06 Submittals <br />A. Submit samples in accordance with this specification. <br />17 -198 Sheet Metal Flashing and Trim <br />076200 -1 <br />