Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />B. Fire - Test - Response Characteristics: Provide horizontal louver blinds with the fire- test - response <br />characteristics indicated, as determined by testing identical products per test method indicated <br />below by UL or another testing and inspecting agency acceptable to authorities having <br />jurisdiction. Identify materials with appropriate markings of applicable testing and inspecting <br />agency. <br />Flame- Resistance Ratings: Passes NFPA 701. <br />C. Product Standard: Provide horizontal louver blinds complying with WCSC A 100.1. <br />1.5 DELIVERY, STORAGE, AND HANDLING <br />A. Deliver horizontal louver blinds in factory packages, marked with manufacturer and product <br />name, fire- test - response characteristics, lead -free designation, and location of installation using <br />same designations indicated on Drawings and in a window treatment schedule. <br />1.6 PROJECT CONDITIONS <br />A. Environmental Limitations: Do not install horizontal louver blinds until construction and wet <br />and dirty finish work in spaces, including painting, is complete and dry and ambient <br />temperature and humidity conditions are maintained at the levels indicated for Project when <br />occupied for its intended use. <br />B. Field Measurements: Where horizontal louver blinds are indicated to fit to other construction, <br />verify dimensions of other construction by field measurements before fabrication and indicate <br />measurements on Shop Drawings. Allow clearances for operable glazed units' operation <br />hardware throughout the entire operating range. Notify Architect of discrepancies. Coordinate <br />fabrication schedule with construction progress to avoid delaying the Work. <br />1.7 EXTRA MATERIALS <br />A. Furnish extra materials described below that match products installed and that are packaged <br />with protective covering for storage and identified with labels describing contents. <br />Horizontal Louver Blinds: Before installation begins, for each size, color, texture, <br />pattern, and gloss indicated, full -size units equal to 5 percent of amount installed, but no <br />fewer than two units. <br />PART2- PRODUCTS <br />2.1 HORIZONTAL LOUVER BLINDS, ALUMINUM SLATS, HB -1 <br />A. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, the following: <br />1. Hunter Douglas Contract: CD88 -1" Mini Aluminum Blind. <br />HORIZONTAL LOUVER BLINDS 124910-2 <br />