Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />L. Finishes: <br />1. Manufacturer's standard baked - enamel paint for the following: <br />a. Exterior of cabinet, door, and trim, except for those surfaces indicated to receive <br />another finish. <br />b. Interior of cabinet and door. <br />2. Steel: Baked enamel. <br />a. Color and Texture: As selected by Architect from manufacturer's full range. <br />2.5 FABRICATION <br />A. Fire - Protection Cabinets: Provide manufacturer's standard box (tub), with trim, frame, door, <br />and hardware to suit cabinet type, trim style, and door style indicated. <br />1. Weld joints and grind smooth. <br />2. Construct fire -rated cabinets with double walls fabricated from 0.0428 -inch- (1.1 -mm -) <br />thick, cold - rolled steel sheet lined with minimum 5/8 -inch- (16 -mm -) thick, fire- barrier <br />material. <br />a. Provide factory - drilled mounting holes. <br />B. Cabinet Doors: Fabricate doors according to manufacturer's standards, from materials indicated <br />and coordinated with cabinet types and trim styles selected. <br />1. Fabricate door frames with tubular stiles and rails and hollow -metal design, minimum 1/2 <br />inch (13 mm) thick. <br />2. Miter and weld perimeter door frames. <br />C. Cabinet Trim: Fabricate cabinet trim in one piece with corners mitered, welded, and ground <br />smooth. <br />2.6 FINISHES, GENERAL <br />A. Comply with NAAMM's "Metal Finishes Manual for Architectural and Metal Products" for <br />recommendations for applying and designating finishes. <br />B. Protect mechanical finishes on exposed surfaces from damage by applying a strippable, <br />temporary protective covering before shipping. <br />C. Finish fire- protection cabinets after assembly. <br />D. Appearance of Finished Work: Variations in appearance of abutting or adjacent pieces are <br />acceptable if they are within one -half of the range of approved Samples. Noticeable variations <br />in the same piece are not acceptable. Variations in appearance of other components are <br />acceptable if they are within the range of approved Samples and are assembled or installed to <br />minimize contrast. <br />FIRE- PROTECTION SPECIALTIES 105201 -5 <br />