Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />C. Samples for Initial Selection: Manufacturer's color charts consisting of actual units or sections <br />of units showing the full range of colors available for the following: <br />1. Acrylic sheet. <br />2. Polycarbonate sheet. <br />3. Fiberglass sheet. <br />4. Die -cut vinyl characters and graphic symbols. Include representative samples of <br />available typestyles and graphic symbols. <br />D. Samples for Verification: For each of the following products and for the full range of color, <br />texture, and sign material indicated, of sizes indicated: <br />1. Dimensional Characters: Full -size Samples of each type of dimensional character (letter, <br />number, and graphic element). <br />2. Aluminum: For each form, finish, and color, on 6 -inch- (150 -mm -) long sections of <br />extrusions and squares of sheet at least 4 by 4 inches (100 by 100 mm). <br />3. Acrylic Sheet: 8 by 10 inches (200 by 250 mm) for each color required. <br />4. Polycarbonate Sheet: 8 by 10 inches (200 by 250 mm) for each color required. <br />5. Panel Signs: Not less than 12 inches (305 mm) square. <br />6. Accessories: Manufacturer's full -size unit. <br />E. Sign Schedule: Use same designations indicated on Drawings. <br />F. Qualification Data: For Installer and fabricator. <br />G. Maintenance Data: For signs to include in maintenance manuals. <br />H. Warranty: Special warranty specified in this Section. <br />1.5 QUALITY ASSURANCE <br />A. Installer Qualifications: An employer of workers trained and approved by manufacturer. <br />B. Fabricator Qualifications: Shop that employs skilled workers who custom - fabricate products <br />similar to those required for this Project and whose products have a record of successful in- <br />service performance. <br />C. Source Limitations for Signs: Obtain each sign type indicated from one source from a single <br />manufacturer. <br />D. Regulatory Requirements: Comply with applicable provisions in ADA -ABA Accessibility <br />Guidelines and the North Carolina Accessibility Code. <br />1.6 PROJECT CONDITIONS <br />A. Weather Limitations: Proceed with installation only when existing and forecasted weather <br />conditions permit installation of signs in exterior locations to be performed according to <br />manufacturers' written instructions and warranty requirements. <br />SIGNAGE 104313 -2 <br />