Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />3.2 PREPARATION <br />A. Comply with manufacturer's written instructions and recommendations in "MPI Manual" <br />applicable to substrates indicated. <br />B. Remove hardware, covers, plates, and similar items already in place that are removable and are <br />not to be painted. If removal is impractical or impossible because of size or weight of item, <br />provide surface - applied protection before surface preparation and painting. <br />After completing painting operations, use workers skilled in the trades involved to <br />reinstall items that were removed. Remove surface- applied protection if any. <br />C. Clean substrates of substances that could impair bond of paints, including dust, dirt, oil, grease, <br />and incompatible paints and encapsulants. <br />Remove incompatible primers and reprime substrate with compatible primers or apply tie <br />coat as required to produce paint systems indicated. <br />D. Shop- Primed Steel Substrates: Clean field welds, bolted connections, and abraded areas of shop <br />paint, and paint exposed areas with the same material as used for shop priming to comply with <br />SSPC -PA 1 for touching up shop - primed surfaces. <br />3.3 APPLICATION <br />A. Apply paints according to manufacturer's written instructions and to recommendations in "MPI <br />Manual." <br />1. Use applicators and techniques suited for paint and substrate indicated. <br />2. Paint surfaces behind movable equipment and furniture same as similar exposed surfaces. <br />Before final installation, paint surfaces behind permanently fixed equipment or furniture <br />with prime coat only. <br />3. Paint front and backsides of access panels, removable or hinged covers, and similar <br />hinged items to match exposed surfaces. <br />4. Do not paint over labels of independent testing agencies or equipment name, <br />identification, performance rating, or nomenclature plates. <br />5. Primers specified in painting schedules may be omitted on items that are factory primed <br />or factory finished if acceptable to topcoat manufacturers. <br />B. If undercoats or other conditions show through topcoat, apply additional coats until cured film <br />has a uniform paint finish, color, and appearance. <br />C. Apply paints to produce surface films without cloudiness, spotting, holidays, laps, brush marks, <br />roller tracking, runs, sags, ropiness, or other surface imperfections. Cut in sharp lines and color <br />breaks. <br />D. Painting Fire Suppression, Plumbing, HVAC, Electrical, Communication, and Electronic Safety <br />and Security Work: <br />Paint the following work where exposed in occupied spaces: <br />INTERIOR PAINTING 099123-5 <br />