Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />SECTION 099123 - INTERIOR PAINTING <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section includes surface preparation and the application of paint systems on interior substrates. <br />1.3 DEFINITIONS <br />A. Gloss Level 1: Not more than 5 units at 60 degrees and 10 units at 85 degrees, according to <br />ASTM D 523. <br />B. Gloss Level 3: 10 to 25 units at 60 degrees and 10 to 35 units at 85 degrees, according to <br />ASTM D 523. <br />C. Gloss Level 5: 35 to 70 units at 60 degrees, according to ASTM D 523. <br />1.4 ACTION SUBMITTALS <br />A. Product Data: For each type of product. Include preparation requirements and application <br />instructions. <br />B. Samples for Initial Selection: For each type of topcoat product. <br />C. Samples for Verification: For each type of paint system and in each color and gloss of topcoat. <br />1. Submit Samples on rigid backing, 8 inches (200 mm) square. <br />2. Step coats on Samples to show each coat required for system. <br />3. Label each coat of each Sample. <br />4. Label each Sample for location and application area. <br />D. Product List: For each product indicated, include the following: <br />1. Cross - reference to paint system and locations of application areas. Use same <br />designations indicated on Drawings and in schedules. <br />2. Printout of current "MPI Approved Products List" for each product category specified in <br />Part 2, with the proposed product highlighted. <br />3. VOC content. <br />INTERIOR PAINTING 099123-1 <br />