Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />PART 2- PRODUCTS <br />2.1 MANUFACTURERS <br />A. Manufacturers: Subject to compliance with requirements, provide products by the following: <br />1. Duron, Inc. <br />2. ICI Paints. <br />3. PPG Architectural Finishes, Inc. <br />4. Sherwin- Williams Company (The). <br />2.2 PAINT, GENERAL <br />A. MPI Standards: Provide products that comply with MPI standards indicated and that are listed <br />in its "MPI Approved Products List." <br />B. Material Compatibility: <br />1. Provide materials for use within each paint system that are compatible with one another <br />and substrates indicated, under conditions of service and application as demonstrated by <br />manufacturer, based on testing and field experience. <br />2. For each coat in a paint system, provide products recommended in writing by <br />manufacturers of topcoat for use in paint system and on substrate indicated. <br />C. Colors: As selected by Architect from manufacturer's full range. <br />1. 20 percent of surface area will be painted with deep tones. <br />2.3 METAL PRIMERS <br />A. Primer, Alkyd, Quick Dry, for Metal: MPI #76. <br />2.4 WATER -BASED PAINTS <br />A. Latex, Exterior Flat (Gloss Level 1): MPI #10. <br />PART 3 - EXECUTION <br />3.1 EXAMINATION <br />A. Examine substrates and conditions, with Applicator present, for compliance with requirements <br />for maximum moisture content and other conditions affecting performance of the Work. <br />B. Maximum Moisture Content of Substrates: When measured with an electronic moisture meter <br />as follows: <br />EXTERIOR PAINTING 099113 -2 <br />