Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />2. Long Edges: Tapered. <br />D. Moisture- and Mold- Resistant Gypsum Board: ASTM C 1396/C 1396M. With moisture- and <br />mold- resistant core and paper surfaces. <br />1. Core: As indicated. <br />2. Long Edges: Tapered. <br />3. Mold Resistance: ASTM D 3273, score of 10 as rated according to ASTM D 3274. <br />2.4 TRIM ACCESSORIES <br />A. Interior Trim: ASTM C 1047. <br />1. Material: Galvanized or aluminum- coated steel sheet, rolled zinc, plastic, or paper -faced <br />galvanized steel sheet. <br />2. Shapes: <br />a. Cornerbead. <br />b. L -Bead: L- shaped; exposed long flange receives joint compound. <br />C. Expansion (control) joint. <br />f►•>�.�t� IT ►Y y _ _► M�71m i G <br />A. General: Comply with ASTM C 4751C 475M. <br />B. Joint Tape: <br />1. Interior Gypsum Board: Paper. <br />C. Joint Compound for Interior Gypsum Board: For each coat use formulation that is compatible <br />with other compounds applied on previous or for successive coats. <br />1. Prefilling: At open joints, rounded or beveled panel edges, and damaged surface areas, <br />use setting -type taping compound. <br />2. Embedding and First Coat: For embedding tape and first coat on joints, fasteners, and <br />trim flanges, use setting -type taping compound. <br />3. Fill Coat: For second coat, use setting -type, sandable topping compound. <br />4. Finish Coat: For third coat, use setting -type, sandable topping compound. <br />2.6 AUXILIARY MATERIALS <br />A. General: Provide auxiliary materials that comply with referenced installation standards and <br />manufacturer's written recommendations. <br />B. Laminating Adhesive: Adhesive or joint compound recommended for directly adhering <br />gypsum panels to continuous substrate. <br />1. Laminating adhesive shall have a VOC content of 50 g/L or less when calculated <br />according to 40 CFR 59, Subpart D (EPA Method 24). <br />GYPSUM BOARD 092900-3 <br />