Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />2. Door Openings: Screw vertical studs at jambs to jamb anchor clips on door frames; <br />install runner track section (for cripple studs) at head and secure to jamb studs. <br />a. Install two studs at each jamb unless otherwise indicated. <br />b. Install cripple studs at head adjacent to each jamb stud, with a minimum 1/2 -inch <br />(13 -mm) clearance from jamb stud to allow for installation of control joint in <br />finished assembly. <br />3. Other Framed Openings: Frame openings other than door openings the same as required <br />for door openings unless otherwise indicated. Install framing below sills of openings to <br />match framing required above door heads. <br />4. Fire - Resistance -Rated Partitions: Install framing to comply with fire- resistance -rated <br />assembly indicated and support closures and to make partitions continuous from floor to <br />underside of solid structure. <br />a. Firestop Track: Where indicated, install to maintain continuity of fire-resistance- <br />rated assembly indicated. <br />5. Sound -Rated Partitions: Install framing to comply with sound -rated assembly indicated. <br />E. Direct Furring: <br />Attach to concrete or masonry with stub nails, screws designed for masonry attachment, <br />or powder -driven fasteners spaced 24 inches (6 10 mm) o. c. <br />F. Installation Tolerance: Install each framing member so fastening surfaces vary not more than <br />1/8 inch (3 mm) from the plane formed by faces of adjacent framing. <br />NON - STRUCTURAL METAL FRAMING 092216-4 <br />