Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />units that deteriorate as defined in "Definitions" Article, f.o.b. the nearest shipping point to <br />Project site, within specified warranty period indicated below. <br />Warranty Period: 10 years from date of Substantial Completion. <br />B. Manufacturer's Special Warranty on Insulating Glass: Manufacturer's standard form, made out <br />to Owner and signed by insulating -glass manufacturer agreeing to replace insulating -glass units <br />that deteriorate as defined in "Definitions" Article, f.o.b. the nearest shipping point to Project <br />site, within specified warranty period indicated below. <br />Warranty Period: 10 years from date of Substantial Completion. <br />PART 2- PRODUCTS <br />2.1 MANUFACTURERS <br />A. In other Part 2 articles where titles below introduce lists, the following requirements apply to <br />product selection: <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, products specified. <br />2. Products: Subject to compliance with requirements, provide one of the products <br />specified. <br />3. Product: Subject to compliance with requirements, provide product specified. <br />4. Available Manufacturers: Subject to compliance with requirements, manufacturers <br />offering products that may be incorporated into the Work include, but are not limited to, <br />manufacturers specified. <br />5. Manufacturers: Subject to compliance with requirements, provide products by one of the <br />manufacturers specified. <br />6. Basis -of- Design Product: The design for each glazing product is based on the product <br />named. Subject to compliance with requirements, provide either the named product or a <br />comparable product by one of the other manufacturers specified. <br />2.2 GLASS PRODUCTS <br />A. Annealed Float Glass: ASTM C 1036, Type I (transparent flat glass), Quality -Q3; of class <br />indicated. <br />B. Heat - Treated Float Glass: ASTM C 1048; Type I (transparent flat glass); Quality -Q3; of class, <br />kind, and condition indicated. <br />1. Fabrication Process: By horizontal (roller- hearth) process with roll -wave distortion <br />parallel to bottom edge of glass as installed, unless otherwise indicated. <br />2. Provide Kind HS (heat - strengthened) float glass in place of annealed float glass where <br />needed to resist thermal stresses induced by differential shading of individual glass lites <br />and to comply with glass design requirements specified in Part 1 "Performance <br />Requirements" Article. <br />GLAZING 088000-6 <br />