Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />A. Manufacturer's Nameplate: Do not provide products that have manufacturer's name or trade <br />name displayed in a visible location except in conjunction with required fire -rated labels and as <br />otherwise approved by Architect. <br />Manufacturer's identification is permitted on rim of lock cylinders only. <br />B. Base Metals: Produce door hardware units of base metal indicated, fabricated by forming <br />method indicated, using manufacturer's standard metal alloy, composition, temper, and <br />hardness. Furnish metals of a quality equal to or greater than that of specified door hardware <br />units and BHMA A156.18. <br />C. Fasteners: Provide door hardware manufactured to comply with published templates prepared <br />for machine, wood, and sheet metal screws. Provide screws that comply with commercially <br />recognized industry standards for application intended, except aluminum fasteners are not <br />permitted. Provide Phillips flat -head screws with finished heads to match surface of door <br />hardware, unless otherwise indicated. <br />1. Concealed Fasteners: For door hardware units that are exposed when door is closed, <br />except for units already specified with concealed fasteners. Do not use through bolts for <br />installation where bolt head or nut on opposite face is exposed unless it is the only means <br />of securely attaching the door hardware. Where through bolts are used on hollow door <br />and frame construction, provide sleeves for each through bolt. <br />2. Fire -Rated Applications: <br />a. Wood or Machine Screws: For the following: <br />1) Hinges mortised to doors or frames; use threaded -to- the -head wood screws <br />for wood doors and frames. <br />2) Strike plates to frames. <br />3) Closers to doors and frames. <br />3. Fasteners for Wood Doors: Comply with requirements in DHI WDHS.2, "Recommended <br />Fasteners for Wood Doors." <br />4. Gasketing Fasteners: Provide noncorrosive fasteners for exterior applications and <br />elsewhere as indicated. <br />2.14 FINISHES <br />A. Provide finishes complying with BHMA A156.18 as indicated in door hardware schedule. <br />B. Protect mechanical finishes on exposed surfaces from damage by applying a strippable, <br />temporary protective covering before shipping. <br />C. Appearance of Finished Work: Variations in appearance of abutting or adjacent pieces are <br />acceptable if they are within one -half of the range of approved Samples. Noticeable variations <br />in the same piece are not acceptable. Variations in appearance of other components are <br />acceptable if they are within the range of approved Samples and are assembled or installed to <br />minimize contrast. <br />DOOR HARDWARE 087100- 10 <br />