Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />SECTION 081416 - FLUSH WOOD DOORS <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section Includes: <br />1. Solid -core doors with wood - veneer faces. <br />2. Factory finishing flush wood doors. <br />3. Factory fitting flush wood doors to frames and factory machining for hardware. <br />B. Related Sections: <br />1. Section 088000 "Glazing" for glass view panels in flush wood doors. <br />1.3 ACTION SUBMITTALS <br />A. Product Data: For each type of door indicated. Include details of core and edge construction <br />and trim for openings. Include factory- finishing specifications. <br />B. Shop Drawings: Indicate location, size, and hand of each door; elevation of each kind of door; <br />construction details not covered in Product Data; location and extent of hardware blocking; and <br />other pertinent data. <br />1. Indicate dimensions and locations of mortises and holes for hardware. <br />2. Indicate dimensions and locations of cutouts. <br />3. Indicate requirements for veneer matching. <br />4. Indicate doors to be factory finished and finish requirements. <br />5. Indicate fire- protection ratings for fire -rated doors. <br />C. Samples for Initial Selection: For factory- finished doors. <br />D. Samples for Verification: <br />1. Factory finishes applied to actual door face materials, approximately 8 by 10 inches (200 <br />by 250 mm), for each material and finish. For each wood species and transparent finish, <br />provide set of three samples showing typical range of color and grain to be expected in <br />the finished work. <br />FLUSH WOOD DOORS 081416-1 <br />