Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />fA• MIQ9121W <br />A. Copings: Manufactured coping system consisting of formed -metal coping cap in section <br />lengths not exceeding 12 feet (3.6 m), concealed anchorage, concealed splice plates with same <br />finish as coping caps, mitered corner units, and end cap units. <br />Basis -of- Design Product: Perimeter Systems, a division of Southern Aluminum <br />Finishing Co.; PLC -6 Press -Loc Coping or a comparable product by one of the following: <br />a. Architectural Products Co. <br />b. ATAS International, Inc. <br />C. Hickman, W. P. Company. <br />d. Merchant & Evans, Inc. <br />e. Metal -Era, Inc. <br />f. Metal -Fab Manufacturing LLC. <br />g. MM Systems Corporation. <br />h. Petersen Aluminum Corp. <br />2. Coping Caps: Snap -on, fabricated from the following exposed metal: <br />a. Aluminum: 0.050 inch (1.2 mm) thick. <br />3. Coping Cap Color: As selected by Architect from manufacturer's full range. <br />4. Corners: Continuously welded. <br />5. Snap -on Coping Anchor Plates: Concealed, galvanized steel sheet, 12 inches (300 mm) <br />wide, 0.028 inch (0.7 mm) thick, with integral cleats. <br />2.6 COUNTERFLASHINGS AND REGLETS <br />A. Basis -of- Design Product: MM Systems Corporation; RC -3 Snap -tite Reglet and <br />Counterflashing System or a comparable product by one of the following: <br />1. Fry Reglet Corporation. <br />2. Hickman, W. P. Company. <br />3. Keystone Flashing Company. <br />4. Merchant & Evans, Inc. <br />5. Metal -Era, Inc. <br />6. MM Systems Corporation. <br />B. Counterflashings: Manufactured units in lengths not exceeding 12 feet (3.6 m) designed to snap <br />into reglets and compress against base flashings with joints lapped, from the following exposed <br />metal in thickness indicated: <br />Aluminum: 0.032 inch (0.8 mm) thick. <br />C. Reglets: Manufactured units formed to provide secure interlocking of separate reglet and <br />counterflashing pieces, and compatible with flashings indicated with factory- mitered and - <br />welded corners and junctions, from the following exposed metal in thickness indicated: <br />MANUFACTURED ROOF SPECIALTIES 077100-5 <br />