Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />PAI-uhf-11111111 '1:11I [Glen W." . 011300 .y <br />A. Adhesively Attached, Spindle -Type Anchors: Plate welded to projecting spindle; capable of <br />holding insulation of thickness indicated securely in position indicated with self- locking washer <br />in place; and complying with the following requirements: <br />Available Products: <br />a. AGM Industries, Inc.; Series T TACTOO Insul- Hangers. <br />b. Eckel Industries of Canada; Stic -Klip Type N Fasteners. <br />C. Gemco; Spindle Type. <br />2. Plate: Perforated galvanized carbon -steel sheet, 0.030 inch (0.762 mm) thick by 2 inches <br />(50 mm) square. <br />3. Spindle: Copper- coated, low carbon steel; fully annealed; 0.105 inch (2.67 mm) in <br />diameter; length to suit depth of insulation indicated. <br />B. Adhesively Attached, Angle- Shaped, Spindle -Type Anchors: Angle welded to projecting <br />spindle; capable of holding insulation of thickness indicated securely in position indicated with <br />self - locking washer in place; and complying with the following requirements: <br />Available Products: <br />a. Gemco; 90- Degree Insulation Hangers. <br />2. Angle: Formed from 0.030 -inch- (0.762 -mm -) thick, perforated, galvanized carbon -steel <br />sheet with each leg 2 inches (50 mm) square. <br />3. Spindle: Copper- coated, low carbon steel; fully annealed; 0.105 inch (2.67 mm) in <br />diameter; length to suit depth of insulation indicated. <br />C. Insulation- Retaining Washers: Self - locking washers formed from 0.016 -inch- (0.41 -mm -) thick <br />galvanized steel sheet, with beveled edge for increased stiffness, sized as required to hold <br />insulation securely in place, but not less than 1 -1/2 inches (38 mm) square or in diameter. <br />Available Products: <br />a. AGM Industries, Inc.; RC150. <br />b. AGM Industries, Inc.; SC150. <br />C. Gemco; Dome -Cap. <br />d. Gemco; R -150. <br />e. Gemco; 5 -150. <br />D. Insulation Standoff. Spacer fabricated from galvanized mild -steel sheet for fitting over spindle <br />of insulation anchor to maintain air space of 2 inches (50 mm) between face of insulation and <br />substrate to which anchor is attached. <br />Available Products: <br />a. Gemco; Clutch Clip. <br />BUILDING INSULATION 07210-6 <br />