Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />1.5 QUALITY ASSURANCE <br />A. Source Limitations: Obtain each type of building insulation through one source from a single <br />manufacturer. <br />B. Fire - Test - Response Characteristics: Provide insulation and related materials with the fire -test- <br />response characteristics indicated, as determined by testing identical products per test method <br />indicated below by UL or another testing and inspecting agency acceptable to authorities having <br />jurisdiction. Identify materials with appropriate markings of applicable testing and inspecting <br />agency. <br />1. Surface - Burning Characteristics: ASTM E 84. <br />2. Fire - Resistance Ratings: ASTM E 119. <br />3. Combustion Characteristics: ASTM E 136. <br />1.6 DELIVERY, STORAGE, AND HANDLING <br />A. Protect insulation materials from physical damage and from deterioration by moisture, soiling, <br />and other sources. Store inside and in a dry location. Comply with manufacturer's written <br />instructions for handling, storing, and protecting during installation. <br />B. Protect plastic insulation as follows: <br />1. Do not expose to sunlight, except to extent necessary for period of installation and <br />concealment. <br />2. Protect against ignition at all times. Do not deliver plastic insulating materials to Project <br />site before installation time. <br />3. Complete installation and concealment of plastic materials as rapidly as possible in each <br />area of construction. <br />PART 2- PRODUCTS <br />fPA'U /: ►�0I <br />A. In other Part 2 articles where titles below introduce lists, the following requirements apply to <br />product selection: <br />1. Available Products: Subject to compliance with requirements, products that may be <br />incorporated into the Work include, but are not limited to, products specified. <br />2. Available Manufacturers: Subject to compliance with requirements, manufacturers <br />offering products that may be incorporated into the Work include, but are not limited to, <br />manufacturers specified. <br />BUILDING INSULATION 07210-2 <br />