Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />1. Align adjacent solid- surfacing - material countertops and form seams to comply with <br />manufacturer's written recommendations using adhesive in color to match countertop. <br />Carefully dress joints smooth, remove surface scratches, and clean entire surface. <br />2. Install countertops with no more than 1/8 inch in 96 -inch (3 mm in 2400 -mm) sag, bow, <br />or other variation from a straight line. <br />3. Secure backsplashes to tops with concealed metal brackets at 16 inches (400 mm) o.c. <br />and to walls with adhesive. <br />4. Caulk space between backsplash and wall with sealant specified in Division 7 Section <br />"Joint Sealants." <br />I. Touch up finishing work specified in this Section after installation of woodwork. Fill nail holes <br />with matching filler where exposed. <br />J. Refer to Division 9 Sections for final finishing of installed architectural woodwork not indicated <br />to be shop finished. <br />3.3 ADJUSTING AND CLEANING <br />A. Repair damaged and defective woodwork, where possible, to eliminate functional and visual <br />defects; where not possible to repair, replace woodwork. Adjust joinery for uniform <br />appearance. <br />B. Clean, lubricate, and adjust hardware. <br />C. Clean woodwork on exposed and semiexposed surfaces. Touch up shop - applied finishes to <br />restore damaged or soiled areas. <br />I015MZIt]3.Y O [It]N[ILZ1040 1 <br />INTERIOR ARCHITECTURAL WOODWORK 064021 -9 <br />