Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />B. Welding Qualifications: Qualify procedures and personnel according to the following: <br />1. AWS D1.1/D1.1M, "Structural Welding Code - Steel." <br />1.7 PROJECT CONDITIONS <br />A. Field Measurements: Verify actual locations of walls and other construction contiguous with <br />metal fabrications by field measurements before fabrication. <br />1.8 COORDINATION AND SCHEDULING <br />A. Coordinate selection of shop primers with topcoats to be applied over them. Comply with paint <br />and coating manufacturers' written recommendations to ensure that shop primers and topcoats <br />are compatible with one another. <br />B. Coordinate installation of anchorages for railings. Furnish setting drawings, templates, and <br />directions for installing anchorages, including sleeves, concrete inserts, anchor bolts, and items <br />with integral anchors, that are to be embedded in concrete or masonry. Deliver such items to <br />Project site in time for installation. <br />C. Schedule installation so wall attachments are made only to completed walls. Do not support <br />railings temporarily by any means that do not satisfy structural performance requirements. <br />PART 2 - PRODUCTS <br />2.1 METALS, GENERAL <br />A. Metal Surfaces, General: Provide materials with smooth surfaces, without seam marks, roller <br />marks, rolled trade names, stains, discolorations, or blemishes. <br />B. Brackets, Flanges, and Anchors: Cast or formed metal of same type of material and finish as <br />supported rails unless otherwise indicated. <br />2.2 STEEL AND IRON <br />A. Recycled Content of Steel Products: Postconsumer recycled content plus one -half of <br />preconsumer recycled content not less than 25 percent. <br />B. Tubing: ASTM A 500 (cold formed) or ASTM A 513. <br />C. Pipe: ASTM A 53/A 53M, Type F or Type S, Grade A, Standard Weight (Schedule 40), unless <br />another grade and weight are required by structural loads. <br />1. Provide galvanized finish for exterior installations and where indicated. <br />D. Plates, Shapes, and Bars: ASTM A 36/A 36M. <br />PIPE AND TUBE RAILINGS 055213 -3 <br />