Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />QUALITY ASSURANCE <br />a. Engineering Responsibility: Preparation of Shop Drawings, design calculations, and other <br />structural data by a qualified professional engineer. <br />b. Professional Engineer Qualifications: A professional engineer who is legally qualified to <br />practice in jurisdiction where Project is located and who is experienced in providing engineering <br />services of the kind indicated. Engineering services are defined as those performed for <br />installations of cold - formed metal framing that are similar to those indicated for this Project in <br />material, design, and extent. <br />C. Product Tests: Mill certificates or data from a qualified independent testing agency, or in -house <br />testing with calibrated test equipment indicating steel sheet complies with requirements, <br />including base -metal thickness, yield strength, tensile strength, total elongation, chemical <br />requirements, and metallic- coating thickness. <br />d. Welding: Qualify procedures and personnel according to AWS D1.1/D1.1M, "Structural <br />Welding Code -- Steel," and AWS 131.3, "Structural Welding Code- -Sheet Steel." <br />e. AISI Specifications and Standards: Comply with AISI's "North American Specification for the <br />Design of Cold - Formed Steel Structural Members" and its "Standard for Cold- Formed Steel <br />Framing - General Provisions." <br />1). Comply with AISI's "Standard for Cold- Formed Steel Framing - Header Design." <br />f. Preinstallation Conference: Conduct conference at Project site to comply with requirements in <br />Division 1 Section "Project Management and Coordination." <br />6. DELIVERY, STORAGE, AND HANDLING <br />a. Protect cold - formed metal framing from corrosion, deformation, and other damage during <br />delivery, storage, and handling. <br />b. Store cold - formed metal framing, protect with a waterproof covering, and ventilate to avoid <br />condensation. <br />PART2- PRODUCTS <br />MANUFACTURERS <br />a. Available Manufacturers: Subject to compliance with requirements, manufacturers offering <br />cold- formed metal framing that may be incorporated into the Work include, but are not limited <br />to, the following: <br />1). Allied Studco. <br />COLD - FORMED METAL FRAMING 054000-3 <br />