Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />D. Waste Management Conference: Conduct conference at Project site to comply with <br />requirements in Section 013100 "Project Management and Coordination." Review methods and <br />procedures related to waste management including, but not limited to, the following: <br />1. Review and discuss waste management plan including responsibilities of waste <br />management coordinator. <br />2. Review requirements for documenting quantities of each type of waste and its <br />disposition. <br />3. Review and finalize procedures for materials separation and verify availability of <br />containers and bins needed to avoid delays. <br />4. Review procedures for periodic waste collection and transportation to recycling and <br />disposal facilities. <br />5. Review waste management requirements for each trade. <br />1.8 WASTE MANAGEMENT PLAN <br />A. General: Develop a waste management plan according to ASTM E 1609 and requirements in <br />this Section. Plan shall consist of waste identification, waste reduction work plan, and <br />cost/revenue analysis. Distinguish between demolition and construction waste. Indicate <br />quantities by weight or volume, but use same units of measure throughout waste management <br />plan. <br />B. Waste Identification: Indicate anticipated types and quantities of demolition and construction <br />waste generated by the Work. Include estimated quantities and assumptions for estimates. <br />C. Waste Reduction Work Plan: List each type of waste and whether it will be salvaged, recycled, <br />or disposed of in landfill or incinerator. Include points of waste generation, total quantity of <br />each type of waste, quantity for each means of recovery, and handling and transportation <br />procedures. <br />1. Salvaged Materials for Reuse: For materials that will be salvaged and reused in this <br />Project, describe methods for preparing salvaged materials before incorporation into the <br />Work. <br />2. Salvaged Materials for Sale: For materials that will be sold to individuals and <br />organizations, include list of their names, addresses, and telephone numbers. <br />3. Salvaged Materials for Donation: For materials that will be donated to individuals and <br />organizations, include list of their names, addresses, and telephone numbers. <br />4. Recycled Materials: Include list of local receivers and processors and type of recycled <br />materials each will accept. Include names, addresses, and telephone numbers. <br />5. Disposed Materials: Indicate how and where materials will be disposed o£ Include <br />name, address, and telephone number of each landfill and incinerator facility. <br />6. Handling and Transportation Procedures: Include method that will be used for separating <br />recyclable waste including sizes of containers, container labeling, and designated location <br />where materials separation will be performed. <br />CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL 017419-3 <br />