Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />SECTION 016000 - PRODUCT REQUIREMENTS <br />PART 1 - GENERAL <br />1.1 RELATED DOCUMENTS <br />A. Drawings and general provisions of the Contract, including General and Supplementary <br />Conditions and other Division 01 Specification Sections, apply to this Section. <br />1.2 SUMMARY <br />A. Section includes administrative and procedural requirements for selection of products for use in <br />Project; product delivery, storage, and handling; manufacturers' standard warranties on <br />products; special warranties; and comparable products. <br />B. Related Requirements: <br />1. Section 012300 "Alternates" for products selected under an alternate. <br />2. Section 012500 "Substitution Procedures" for requests for substitutions. <br />3. Section 014200 "References" for applicable industry standards for products specified. <br />1.3 DEFINITIONS <br />A. Products: Items obtained for incorporating into the Work, whether purchased for Project or <br />taken from previously purchased stock. The term "product" includes the terms "material," <br />"equipment," "system," and terms of similar intent. <br />1. Named Products: Items identified by manufacturer's product name, including make or <br />model number or other designation shown or listed in manufacturer's published product <br />literature, that is current as of date of the Contract Documents. <br />2. New Products: Items that have not previously been incorporated into another project or <br />facility. Products salvaged or recycled from other projects are not considered new <br />products. <br />3. Comparable Product: Product that is demonstrated and approved through submittal <br />process to have the indicated qualities related to type, function, dimension, in- service <br />performance, physical properties, appearance, and other characteristics that equal or <br />exceed those of specified product. <br />B. Basis -of- Design Product Specification: A specification in which a specific manufacturer's <br />product is named and accompanied by the words "basis -of- design product," including make or <br />model number or other designation, to establish the significant qualities related to type, <br />function, dimension, in- service performance, physical properties, appearance, and other <br />characteristics for purposes of evaluating comparable products of additional manufacturers <br />named in the specification. <br />PRODUCT REQUIREMENTS 016000-1 <br />