Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />7. Demolish and remove mockups when directed unless otherwise indicated. <br />1.8 QUALITY CONTROL <br />A. Owner Responsibilities: Where quality- control services are indicated as Owner's responsibility, <br />Owner will engage a qualified testing agency to perform these services. <br />1. Owner will furnish Contractor with names, addresses, and telephone numbers of testing <br />agencies engaged and a description of types of testing and inspecting they are engaged to <br />perform. <br />2. Payment for these services will be made from testing and inspecting allowances, as <br />authorized by Change Orders. <br />3. Costs for retesting and reinspecting construction that replaces or is necessitated by work <br />that failed to comply with the Contract Documents will be charged to Contractor, and the <br />Contract Sum will be adjusted by Change Order. <br />B. Contractor Responsibilities: Tests and inspections not explicitly assigned to Owner are <br />Contractor's responsibility. Perform additional quality- control activities required to verify that <br />the Work complies with requirements, whether specified or not. <br />1. Unless otherwise indicated, provide quality - control services specified and those required <br />by authorities having jurisdiction. Perform quality- control services required of <br />Contractor by authorities having jurisdiction, whether specified or not. <br />2. Where services are indicated as Contractor's responsibility, engage a qualified testing <br />agency to perform these quality- control services. <br />a. Contractor shall not employ same entity engaged by Owner, unless agreed to in <br />writing by Owner. <br />3. Notify testing agencies at least 24 hours in advance of time when Work that requires <br />testing or inspecting will be performed. <br />4. Where quality - control services are indicated as Contractor's responsibility, submit a <br />certified written report, in duplicate, of each quality- control service. <br />5. Testing and inspecting requested by Contractor and not required by the Contract <br />Documents are Contractor's responsibility. <br />6. Submit additional copies of each written report directly to authorities having jurisdiction, <br />when they so direct. <br />C. Manufacturer's Field Services: Where indicated, engage a factory- authorized service <br />representative to inspect field- assembled components and equipment installation, including <br />service connections. Report results in writing as specified in Section 013300 "Submittal <br />Procedures." <br />D. Manufacturer's Technical Services: Where indicated, engage a manufacturer's technical <br />representative to observe and inspect the Work. Manufacturer's technical representative's <br />services include participation in preinstallation conferences, examination of substrates and <br />conditions, verification of materials, observation of Installer activities, inspection of completed <br />portions of the Work, and submittal of written reports. <br />QUALITY REQUIREMENTS 014000-6 <br />