Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />C. Factory- Authorized Service Representative's Reports: Prepare written information documenting <br />manufacturer's factory- authorized service representative's tests and inspections specified in <br />other Sections. Include the following: <br />1. Name, address, and telephone number of factory- authorized service representative <br />making report. <br />2. Statement that equipment complies with requirements. <br />3. Results of operational and other tests and a statement of whether observed performance <br />complies with requirements. <br />4. Statement whether conditions, products, and installation will affect warranty. <br />5. Other required items indicated in individual Specification Sections. <br />D. Permits, Licenses, and Certificates: For Owner's records, submit copies of permits, licenses, <br />certifications, inspection reports, releases, jurisdictional settlements, notices, receipts for fee <br />payments, judgments, correspondence, records, and similar documents, established for <br />compliance with standards and regulations bearing on performance of the Work. <br />1.7 QUALITY ASSURANCE <br />A. General: Qualifications paragraphs in this article establish the minimum qualification levels <br />required; individual Specification Sections specify additional requirements. <br />B. Manufacturer Qualifications: A firm experienced in manufacturing products or systems similar <br />to those indicated for this Project and with a record of successful in- service performance, as <br />well as sufficient production capacity to produce required units. <br />C. Fabricator Qualifications: A firm experienced in producing products similar to those indicated <br />for this Project and with a record of successful in- service performance, as well as sufficient <br />production capacity to produce required units. <br />D. Installer Qualifications: A firm or individual experienced in installing, erecting, or assembling <br />work similar in material, design, and extent to that indicated for this Project, whose work has <br />resulted in construction with a record of successful in- service performance. <br />E. Professional Engineer Qualifications: A professional engineer who is legally qualified to <br />practice in jurisdiction where Project is located and who is experienced in providing <br />engineering services of the kind indicated. Engineering services are defined as those performed <br />for installations of the system, assembly, or product that are similar in material, design, and <br />extent to those indicated for this Project. <br />F. Testing Agency Qualifications: An NRTL, an NVLAP, or an independent agency with the <br />experience and capability to conduct testing and inspecting indicated, as documented according <br />to ASTM E 329; and with additional qualifications specified in individual Sections; and, where <br />required by authorities having jurisdiction, that is acceptable to authorities. <br />1. NRTL: A nationally recognized testing laboratory according to 29 CFR 1910.7. <br />2. NVLAP: A testing agency accredited according to NIST's National Voluntary <br />Laboratory Accreditation Program. <br />QUALITY REQUIREMENTS 014000-4 <br />