Orange County NC Website
Browse       Search
DocuSign Envelope ID: 313DA256 -1EDE- 4396- A716- 4C53B809027E <br />JERRY M. PASSMORE CENTER ADDITION AND RENOVATION <br />HILLSBOROUGH, NORTH CAROLINA <br />C. Shop Drawings: Prepare Project - specific information, drawn accurately to scale. Do not base <br />Shop Drawings on reproductions of the Contract Documents or standard printed data, unless <br />submittal based on Architect's digital data drawing files is otherwise permitted. <br />Preparation: Fully illustrate requirements in the Contract Documents. Include the <br />following information, as applicable: <br />a. Identification of products. <br />b. Schedules. <br />C. Compliance with specified standards. <br />d. Notation of coordination requirements. <br />e. Notation of dimensions established by field measurement. <br />£ Relationship and attachment to adjoining construction clearly indicated. <br />g. Seal and signature of professional engineer if specified. <br />2. Sheet Size: Except for templates, patterns, and similar full -size drawings, submit Shop <br />Drawings on sheets at least 8 -1/2 by 11 inches (215 by 280 mm), but no larger than 30 by <br />42 inches (750 by 1067 mm). <br />D. Samples: Submit Samples for review of kind, color, pattern, and texture for a check of these <br />characteristics with other elements and for a comparison of these characteristics between <br />submittal and actual component as delivered and installed. <br />1. Transmit Samples that contain multiple, related components such as accessories together <br />in one submittal package. <br />2. Identification: Attach label on unexposed side of Samples that includes the following: <br />a. Generic description of Sample. <br />b. Product name and name of manufacturer. <br />C. Sample source. <br />d. Number and title of applicable Specification Section. <br />e. Specification paragraph number and generic name of each item. <br />3. Disposition: Maintain sets of approved Samples at Project site, available for quality - <br />control comparisons throughout the course of construction activity. Sample sets may be <br />used to determine final acceptance of construction associated with each set. <br />a. Samples that may be incorporated into the Work are indicated in individual <br />Specification Sections. Such Samples must be in an undamaged condition at time <br />of use. <br />b. Samples not incorporated into the Work, or otherwise designated as Owner's <br />property, are the property of Contractor. <br />4. Samples for Initial Selection: Submit manufacturer's color charts consisting of units or <br />sections of units showing the full range of colors, textures, and patterns available. <br />a. Number of Samples: Submit two full set(s) of available choices where color, <br />pattern, texture, or similar characteristics are required to be selected from <br />manufacturer's product line. Architect will return submittal with options selected. <br />SUBMITTAL PROCEDURES 013300-6 <br />