Orange County NC Website
Browse       Search
Mawi11e Fesw* Board <br />RooOnsulation <br />BUR Constructions <br />1. 3 or 4 ply fiber glass membrane with gravel, smooth or cap <br />sheet surface and over insulated or nailable decks. <br />Single-Ply Constructions <br />1. SPM -60FR mechanically attached membrane. <br />2. SPM -60M and SPM -60W mechanically attached membrane. <br />3. SPM -60, SPM -60FR, SPM -45, or SPM -60W ballasted <br />membrane. <br />Modified Bitumen Constructions <br />1. DynaKap or DynaPly with asphalt and gravel surface over <br />combustible or noncombustible decks. New and retro -fit. <br />2. DynaKap FR and DynaGlas FR over combustible or <br />noncombustible decks. New and retro-fit. <br />Fesco Board is accepted by Factory Mutual Research <br />Corporation for Roof Deck Construction, Insulated Steel Deck, <br />Class 1; Windstorm Resistance (FM Approval Guide and <br />referenced in FM Loss Prevention Data Sheet 1 -28). Refer to <br />current publication for approved vapor retarders, bitumens and <br />mechanical fasteners. <br />Fesco Board complies with the material requirements of ASTM <br />C728 -82. <br />07220 / MAN <br />BuyLine 5060 <br />For Built -Up, Modified Bitumen and <br />Single -Ply Roofing Systems <br />Technical Data <br />Ph sical Properties <br />Values <br />Test Methods <br />Water Absorption, % by <br />Volume -2 hrs. <br />1.5 max. <br />ASTM C209 -72 <br />Compression Resistance, <br />10 % Consolidation —psi <br />35 <br />ASTM C165 -83 <br />Laminar Tensile Strength—psi <br />4 min. <br />ASTM C209 -72 <br />Thermal Conductance <br />BTU /hr. /ft.2/°F) Nom. 1" <br />0.36 <br />ASTM C177 -76 <br />For Use Over Metal Decks <br />Narrow <br />Intermediate Wide <br />Width of Rib Up to 1" Up to I-Y4" Up to 21/2" <br />Opening Maximum Maximum Ma_ ximum <br />Thickness of <br />Insulation 3/4" 1" 11/2" <br />(Minimum) . <br />Avoid concentrating loads on insulation. Minimum bearing on <br />flat surface: 2". <br />.w <br />