Orange County NC Website
22 <br />ARTICLE 5 - DIMENSIONAL REQUIREMENTS ( "Yes" indicates com L�iance; "No" indicates Non - compliance) <br />PLANNING PLANNING <br />STAFF BOARD <br />RECOMMENDED RECOMMENDED <br />FINDINGS EVIDENCE SUBMITTED TO SUPPORT FINDINGS FINDINGS <br />Ordinance Reauirements <br />Article 5 lists standards for <br />minimum lot size, lot width, <br />front, side and rear setbacks, <br />maximum building height and <br />Lot coverage, and development <br />intensity. <br />The applicant has applied <br />for a PD-MHP -R1 designation. <br />The standards for that district <br />are set forth in Article 5.1.1 <br />and are as follows: <br />a) Minimum lot area per dwelling <br />—x—Yes <br />No <br />Article <br />5.1.1 of the Zoning Ordinance. <br />Yes <br />No <br />unit - 40,000 sq. ft. <br />Planned <br />development approved on site <br />basis. <br />b) Minimum lot width - <br />—x—Yes <br />No <br />Same as <br />above. <br />Yes <br />No <br />N/A sq. ft. <br />c) Required front setback - <br />—x —Yes <br />No <br />Same as <br />above. <br />Yes <br />No <br />N/A ft. <br />d) Required side and rear <br />—X—Yes <br />No <br />Same as <br />above. <br />Yes <br />No <br />setbacks - N/A ft. <br />e) Maximum building height - <br />—x—Yes <br />No <br />Same as <br />above. <br />Yes <br />No <br />—N /A_ ft. <br />Compliance with lot coverage <br />and development intensity <br />standards is addressed in <br />Article 6. <br />