Orange County NC Website
Browse       Search
DocuSign Envelope ID:77803446-26E8-4424-B3DD-15F947931AE8 <br /> 3) Work will commence during normal working hours Monday through Friday(8—5 PM)Eastern Time. <br /> 4) All installation work will be performed through a remote connection from BCS headquarters. <br /> 5) Once the installation is completed,acceptance testing is performed by BCS in conjunction with Licensee staff to ensure <br /> successful operation.The implementation phase of the project is complete once a substantial majority of the software is <br /> installed.At the point that sufficient software has been installed to consider the application to be operational,it is <br /> transitioned from implementation to maintenance. <br /> LICENSEE RESPONSIBILITIES <br /> In order to complete a successful implementation,Licensee will need to provide the following: <br /> 1. Interface to the CAD system in accordance with"MARVLIS Server Computer Aided Dispatch Integration Guide"that will <br /> provide the necessary information to MARVLIS Server for dispatches, status changes, and incident locations (Lat/Long) <br /> as well as receiving status changes and vehicle locations from MARVLIS Server. <br /> a. CAD system should provide the following information: <br /> i. Incident Identification Number <br /> ii. Incident location(Lat/Long) <br /> iii. Incident Address <br /> iv. Vehicle assigned identification <br /> v. Priority <br /> vi. Problem Nature <br /> vii. Dispatcher Comments,if applicable <br /> Updates to incident information sent after initial dispatch must include the Incident Identification <br /> Number as a minimum <br /> b. CAD should provide the following information for status changes initiated by CAD <br /> i. Vehicle Identification <br /> ii. New Status to be displayed <br /> c. If status changes initiated by the vehicle are to be transmitted to CAD,provide the interface to accept the <br /> changes from MARVLIS. Data to be sent to CAD will include as a minimum; <br /> i. Vehicle Identification <br /> ii. New Status <br /> MARVLIS IMPLEMENTATION DEPENDENCIES: <br /> The items below are needed to support the MARVLIS software and are not the responsibility of BCS. These items should be <br /> established by customer prior to installation by BCS. <br /> 1. The communications infrastructure to provide wireless connectivity between MARVLIS Client and MARVLIS Server <br /> must be available. MARVLIS Client and MARVLIS Server use TCP/IP communications protocols. <br /> a. Wireless device should be configured to automatically reestablish communications if lost due to coverage or <br /> obstacles. <br /> b. Connection from vehicles to Server should be tested to assure end-to-end connectivity. <br /> 2. The in-vehicle hardware to support MARVLIS Client functions must be available and installed in the vehicles. This <br /> would include the GPS device,the wireless modem device,and a rugged laptop. <br /> a. GPS device should be configured to send location to Client as a NMEA or TAIP string once per second. <br /> b. Laptop should be installed and communications tested to assure that the laptop can communicate to the Server. <br /> 3. The existing OSSI CAD interface must be installed,configured and tested in order to allow the transmission of status <br /> changes etc.between the OSSI and MARVLIS applications. <br /> a. NOTE:BCS will coordinate with OSSI to test the objectives of the interface. However,the BCS quotation does <br /> not include compensating OSSI for their interface. <br /> 4. The computer hardware to support the remaining MARVLIS applications must be available for installation and <br /> configuration.All systems should be connected to the internal network and configured to communicate with each other <br /> and with the CAD Server. The Server will also require communications access to the outside network so that Clients can <br /> connect. <br /> B-5 <br /> CORE/0804998.0008/128897050.2 <br />