Orange County NC Website
Browse       Search
6 <br />Name: Joyce Wilson <br />Address: 105 Roberts Street <br />City: Carrboro <br />Phone #: 967-3720 <br />Date: 11/17/05 <br />Page 3 of 6 <br />Note: Prior to conducting Lead-Based Paint Abatement activities, all personnel <br />associated with the project should review and fully understand the requirements of <br />ALL applicable local, state, and federal regulations that may apply to the worksite. <br />1. WORKSITE PREPARATION <br />A. GROUND CONTAINMENT <br />L. Before exterior construction, construct a work site perimeter curb of <br />2x4 timbers ten (10) feet from the house exterior. Create an outer <br />barrier of flags and/or plastic tape three (3) feet on center and twenty <br />(20) feet from the worksite. Post proper signage in the work area. All <br />warning signs must remain posted until clearance is passed. <br />2. During the period of work on all exterior components attach one layer <br />of 6-mil polyethylene to the building exterior with furring strips, <br />extending the (10) feet past the work site. Wrap the plastic under the <br />perimeter 2x4's. Change the plastic daily. <br />B. CLEARANCE EXAMINATION <br />L After completion of all work that disturbed LBP and any other lead <br />hazard reduction activities, a qualified person shall perform a <br />clearance examination. Work disturbing lead-based paint is not <br />considered complete until clearance is achieved. <br />C. PRE-CLEAN <br />1. Pre-clean the interior of the unit in all areas that Lead Paint was <br />disturbed. IIEPA vacuum all horizontal surfaces, to include all floors, <br />windowsills, troughs, baseboards and casing. <br />$