Agenda - 06-26-2007-4dd - Laserfiche WebLink

Browse Search

laws or regulations and North Carolina State Building Code requirements to prevent accident or injury to persons on or about the location of the Work. The CM shall clearly mark or post signs warning of hazards existing, and shall barricade excavations, elevator shafts, stairwells, floor and wall openings and similar hazards. The CM shall protect against damage or injury resulting from falling materials and shall maintain all protective devices and signs throughout the progress of the Work. 3.10.15.7 The CM shall, at a minimum, adhere to the rules, regulations and interpretations of the North Carolina Department of Labor relating to Occupational Safety and Health Standards for the Construction Industry. 3.10.15.8 As part of the Project Safety Program the CM agrees to implement a Public Hazard Control Plan conforming to the standards set forth in ANSI A10.34-2005R. The Public Hazard Control Plan shall be submitted to the Owner for review and approval before construction begins on the Project. 3.10.15.9 The CM shall designate a responsible member of its organization as safety inspector, whose duties shall include accident prevention on the Project. The name of the onsite safety inspector shall be made known to the Project Designer and Owner at the time the Work is started. The CM will provide the Owner with the name of each Contractor's onsite safety officer. 3.10.15.10 In the event of emergency affecting the safety of life, the protection of Work, or the safety of adjoining properties, the CM is hereby authorized to act at its own discretion, without further authorization from anyone, to prevent such threatened injury or damage. Any compensation claimed by the GM on account of such action shall be determined as provided for under Article 7 herein. 3.10.15.11 If reasonable precautions are inadequate to prevent foreseeable bodily injury or death to persons resulting from a material or substance encountered but not created on the site by the CM or its Contractors, the CM shall, upon recognizing the condition, immediately stop Work in the affected area and report the condition to the Owner and to the Project Designer in writing. The Owner or the Project property owner if different from the Owner shall take responsibility for remediation of the material or substance from the site. If the CM claim's its progress in completing the Project is delayed because of the remediation response to the site, the CM shall file notice and a claim in accordance with this Agreement. 3.10.15.12 Any land-disturbing activity performed by the CM in connection with the Project shall comply with all erosion control measures set forth in the Contract Documents and any additional measures which may be required in order to ensure that the Project is in full compliance with the Sedimentation Pollution Control Act of 1973, as implemented by Title 15, North Carolina Administrative Code, Chapter 4, Sedimentation Control, Subchapters 4A, 4B and 4C, as amended (15 N.C.A.C. 4A, 4B and 4C). 3.11 Post Construction Phase The CM shall provide the following ongoing services in connection with Final Completion of the Work by the Contractors: 3.11.1 Record Documents The CM shall coordinate and expedite submittals of information from the Contractors for preparation of record Drawings and Specifications, and shall coordinate and expedite the transmittal of such record documents to the Owner. 3.11.2 Organize and Index Operations and Maintenance Materials Prior to final completion of the Project the CM shall compile manufacturers' operations and maintenance manuals, warranties and guarantees and bind such documents in an organized manner. This information shall then 6e provided to the Owner. 3.11.3 Occupancy Permit The CM shall assist the Owner and Designer in obtaining an occupancy permit by accompanying governmental officials during inspections of the Project, preparing and submitting documentation to governmental agencies and coordinating final testing and other activities. 3.11.4 Occupancy Plan The CM, in consultation with the Owner, the Designer and appropriate regulatory agencies, shall prepare an Occupancy Plan for the Project. This plan shall be provided to the Owner at least thirty days prior to Substantial Completion. 3.12 Additional Services 14