Orange County NC Website
Browse       Search
DocuSign Envelope ID:A9CF8A9E-4CDB-4BB9-A678-D4AD80CD1393 <br /> 5thWall Building Diagnostics Consultants Roof Replacement <br /> Central Recreation Center <br /> Hillsborough,NC <br /> August 2016 <br /> DIVISION 7 <br /> THERMAL AND MOISTURE PROTECTION <br /> SECTION 072120 <br /> BOARD INSULATION <br /> PART 1 GENERAL <br /> 1.01 Related Documents <br /> Drawings and general provisions of the contract including General, Supplemental, and Special <br /> Conditions and other Division 1 specification sections apply to work of this section. <br /> 1.02 Work Included <br /> A. Installation of polymer modified membrane base sheet over existing deck. <br /> B. Installation of new polyisocyanurate board insulation. Flat and tapered materials to be <br /> installed as depicted on drawings. <br /> 1.03 Related Work <br /> A. Section 061000-Rough Carpentry <br /> B. Section 075217-Polymer Modified Bituminous Membrane Roofing(Cold Applied) <br /> 1.04 Quality Assurance <br /> A. Standards: Comply with standards specified in this section and as listed in the general <br /> requirements. <br /> B. Qualifications of Manufacturer: Products used in the work included in this section shall <br /> be produced by manufacturers regularly engaged in the manufacturer of similar items and <br /> with a history of successful production acceptable to the Owner. <br /> C. Qualifications of Contractor: The Contractor and its personnel shall be currently <br /> approved by the manufacturer of the approved products as qualified to install the <br /> materials of this section. <br /> D. Qualifications of Installers: Use adequate numbers of skilled workmen who are <br /> thoroughly trained and experienced in the necessary crafts and who are completely <br /> familiar with the specified requirements and methods needed for proper performance of <br /> the work in this section. <br /> E. Inspections: Make all required notifications and secure all required inspections by the <br /> manufacturer of the approved materials to facilitate issuance of the specified roof <br /> warranty. <br /> 1.05 Submittals <br /> A. Provide submittals for all materials described in this Section. <br /> { <br /> B. Provide manufacturer's layout of tapered insulation system. <br /> 16-171 Board Insulation <br /> 072120-1 <br />