Agenda - 06-06-1988 - Laserfiche WebLink

Browse Search

. . ..„ Lxcerpz rrom arart Subdivision Regulations • 225 4 d) Buffer Reouirements Buffers shall be required to separate a proposed subdivision froM------ adjacenstreets and different land uses or zoning designa- tions in order to protect, preserve and promote the visual appeal, character and value of the proposed subdivision and/or surrounding property; to provide for the separation of spaces and provide for a sense of privacy; to promote the public health, safety and welfare through minimizing potential nuisances such as the trans- . mission of noise, odor, dust, litter and glare of lights; and to provide screening between incompatible land uses. Except as otherwise specifically provided in fnis Ordinance, the type of buffer required between a proposed subdivision and adjacent streets, land uses or zoning designations shall be as specified in • . Article 4.B.B.d.3 of this Ordinance. • • • 1. Location and Use of Buffers • Required buffers shall be located along the interior or street lot lines nearest the adjacent streets,' land uses and/or zoning designations. Buffers shall not be located on any portion of an existing or proposed street right-of-way or utility easement. • No building shall be erected, constructed or installed in a • required buffer area. *PP Ilw-girrrecs art- ;ft-c.1,,dr.e as • 2. Designation of Buffers •• • A required buffer shall be designated as a part of platted lots and shall have the following restriction lettered on the face of • both the preliminary and final plats of the subdivision: • "Land Use Buffer: The use and maintenance of this buffer and the building of structures thereon is restricted pur- suant to Article 4.B.B.d of the bun of Billsborough • Subdivision Regulations. - • The nature of the street, land use and/or zoning designation ad- joining the subdivision .and/or the required buffer shall also be noted on the plat. . _ - - • 3. Schedule of Reouired Buffers „ •-• The type of buffer required between a proposed subdivision and adjacent-streets, land-uses and-J-6r zoning designations shill-be :• • as specified in the following table. The type of buffer required ••• is determined by the existing and/or proposed principle use(s) in • the subdivision for which approval is reauested. To determine .-- which type of buffer is required adjacent to an existing and/or • proposed principle use(s) in the subdivision, then identify the adjacent existing and/or proposed land uses. The type of buffer required is identified at the intersection of the two columns. ••„•