Agenda - 10-06-1986 - Laserfiche WebLink

Browse Search

• 056 3 . Only one ( 1 ) mobile home may be erected on any mobile home space at one- time . 4 . Each mobile home must be placed on a permanent stand or pad built to the specifications listed below. - a. Each stand must comply with those standards specified in the - - . - , • - . . R- -ulat •ns or Mob e Ro es - f . Modular Sousing" . The remaining area of the stand (that area of the stand which extends beyond the area on which the unit has been placed) must have a base of at least three inches of compacted crushed stone, gravel, or paved slab . b . The location of each mobile home stand must be at a• elevation, distance and angle in relation to the adjapen • access drive so that placement and removal of the mobil:. home is practical by means of customary moving equipment. c . The surface of each mobile home stand or pad and the are- around it shall be graded where necessary for prope drainage. d . The following separation requirements shall pertain to ever, mobile home , single wide or double wide, within the park: 1 ) Minimum Depth of Front Yard* Twenty-five (25) feet measured from the street right-of way line .* 2) Minimum Width of Side Yard* Tea ( 10) feet . 3) Minimum Depth of Rear, Yard* Ten ( 10) feet . * The term "yard" in this context is used to describe th` placement of the mobile home within the mobile bom. space and is not a "setback" requirement as defined i . Article 22 of the Zoning Ordinance. e . No mobile home stand may be located with direct access to - public street . f. An attached structure such as an awning, cabana , storag= building , carport , windbreak , or porch which has a floo area larger than 25 square feet and is roofed will b . considered to be part of the mobile home stand for purpose - of determining separation requirements. - 5 . Each mobile home must have a permanent patio located adjacent t• 7-40