Orange County NC Website
Browse       Search
DocuSign Envelope ID: E9612703-F25B-492D-9C8C-EC3F9728ECE6 <br /> handling unit in supply ductwork), etc. - matched with outdoor condensing unit. <br /> Entire unit to be warranted for one year with additional four(4)years on the compressor. <br /> 15689 MULTI-SPLIT SYSTEM FAN COIL UNIT(HIGH SIDEWALL): <br /> Outdoor Units: <br /> 1.01 System Description <br /> A. Outdoor air--cooled split system compressor sections suitable <br /> for on--the--ground,rooftop, wall hung or balcony mounting. <br /> Units shall consist of a variable speed rotary compressor, an <br /> air--cooled coil,propeller--type draw--through outdoor fan, <br /> reversing valve, accumulator, electronic expansion valves, <br /> multiple service valves, and controls that allows multiple <br /> indoor units to be connected to the outdoor unit.Units shall <br /> discharge horizontally as shown on the contract drawings. <br /> Units shall function as the outdoor component of an air--to--air <br /> heat pump system. <br /> B. Units shall be used in a refrigeration circuit matched to one, <br /> two,three or four High Wall duct--free heat pump fan coil <br /> units. <br /> 1.02 Agency Listings <br /> A. Unit construction shall comply with ANSUASHRAE 15, latest <br /> revision, and with NEC.\ <br /> B. Units shall be evaluated in accordance with UL standard 1995. <br /> C. Units shall be listed in CEC directory. <br /> D. Unit cabinet shall be capable of withstanding 500-hour salt <br /> spray test per Federal Test Standard no. 141 (method 6061). <br /> E. Air-cooled condenser coils shall be leak tested at 573 prig. <br /> 1.03 Delivery, Storage,And Handling <br /> Units shall be shipped in one piece and shall be stored and handled <br /> per manufacturer's recommendations. <br /> 1.04 Warranty(For Inclusion By Specifying <br /> Engineer) <br /> PART 2—PRODUCTS <br /> 2.01 Equipment <br /> A. General: <br /> Factory assembled, single piece, air-cooled outdoor unit. Contained <br /> within the enclosure shall be all factory wiring,piping, controls, <br /> and compressor. <br /> B. Unit Cabinet: <br /> 1. Unit cabinet shall be constructed of galvanized steel, <br /> bonderized and coated with baked-enamel finish on inside <br /> 15H-20 <br />